Thiết Bị
Nhóm Sản Phẩm
LAB GRUPPEN 20K44
Amplifier Lab Gruppen PLM 20K44 SP
Stock | 16 pcs. |
SERIAL # | |
LINK | https://www.labgruppen.com/labgruppen/product?modelCode=P0F61 |
Xem chi tiết
Ẩn thông tin
PLM 20K44
• General Processing / Network Lake / Dante
• Number of amplifier channels 4
• Total burst power all channels (share among channels with RPM) 20000 W
• Max output power (all channels driven)1 2 ohms 4400 W 2.67 ohms 5000 W 4 ohms 4400 W 8 ohms 2300 W 16 ohms 1150 W Hi-Z 70 V 3300 W Hi-Z 100 V 4700 W
• Max output power single channel1 2 ohms 4400 W 2.67 ohms 5900 W 4 ohms 4600 W 8 ohms 2300 W 16 ohms 1150 W Hi-Z 70 V 3300 W Hi-Z 100 V 4700 W
• Amplifier output modules (all models, all channels) Peak output voltage 194 V Max. output current 67 A Rational Power Management (RPM) Regardless of model, any channel has potential to deliver the max single channel output power Default voltage limi
• Audio Performance (Amplifier platform with digital input) THD + N 20 Hz - 20 kHz for 1 W < 0.05 % THD + N at 1 kHz and 1 dB below clipping < 0.04 % Dynamic range > 114 dB Channel separation (Crosstalk) at 1 kHz > 70 dB Frequency response (1 W into
• Lake processing Loudspeaker processing Up to 4 modules of Classic/linear-phase/FIR crossover, EQ, delay, LimiterMax™ - peak and RMS limiters System tuning Group control with Raised Cosine™ MESA EG™ asymmetric filters Input redundancy / Matrix Automat
• Measurement & Analysis Pilot tone generation and analysis Yes Load impedance analysis Yes Real Time Analyzer (RTA), 3rd party integration Yes
• Dante Audio Network Dante I/O 8 x 8 Network topology / redundancy Flexible topology / Supports daisy-chained and Dual redundant networks Sample Rates / Transport 48, 96 kHz / Uni + Multicast Network latency 0.25, 0.5, 1.0, 2.0, 5.0 ms
• Device presets Local memory locations for the settings of the product 100
• AES Inputs Inputs 4 AES inputs Supported sample rates / resolution 44.1, 48, 88.2, 96, 176.4, 192 kHz / up to 24 bits Sample rate conversion THD+N 20 Hz - 20 kHz unweighted 0.0000003
• Analog Inputs Inputs 4 high quality inputs with Iso-Float ground isolation Maximum input / digital reference +26 dBu / +21 dBu Sampling rate / Resolution 96 kHz / 24 bit Input impedance balanced / unbalanced 20 / 10 kOhm THD+N (typical at 1 kHz un
• Limiters Adjustable Inter-Sample Voltage Peak Limiter (ISVPL) 17.8 - 194 V, step size 0.1 V Current Peak Limiter < 300 ms 67 A peak Current Average Limiter (CAL) > 300 ms 33 Arms MaxRMS (rms voltage limiter) Yes MaxPeak (peak voltage limiter) Yes
• Gain Amplifier gain 22 - 44 dB, step size 0.1 dB Output attenuator -Inf to 0 dB, step size 0.25 dB
• Back panel Interface Analog, 2-channel I/O (input + link) 4 x 3-pin XLR, electronically balanced AES / EBU / I/O (input + link) 2 x 3-pin XLR Output connectors Neutrik speakON (1 x NLT8, 2 x NLT4) or 4 Binding Posts (pairs) Auto 10/100, Auto Uplink
• Front-panel user interface Display 2.5 inch, black / white, daylight readable LCD Fault/Warning/Limit/Clip indicators RGB LEDs and detailed fault description on display Mute and soft function buttons 8 provided Standby Power button On/Standby Mute
• Mains Power Nominal voltage 100 - 240 Volt AC 45 - 66 Hz Operating voltage 70-265 V AC Mains wall plug NEMA L5-30 "Twist lock" 125 V / 30 A, and CEE 7/7 "Schuko" 230 V / 16 A
• Power supply features Soft start / Inrush power Yes/ Max 8 Ampere Power Factor Correction (PFC) 0.98 Regulated switch mode power supply (R.SMPS) Yes Breaker Emulation Limiter (BEL) Configurable current threshold and breaker profile BEL max current
• Dimensions Rack rail to rear panel W: 483 mm (19"), H: 88 mm (2 U), D: 424 mm (16") Overall depth front-rear support D: 498 mm (19.6")
• Weight Weight 17 kg (37 lbs)
• Finish Finish Steel painted steel chassis with black painted steel / aluminum front Approvals Approvals CE, ANSI / UL 60065 (ETL), CSA C22.2 NO. 60065, FCC, PSE, RCM, BIS India
Copyright © 2020 PHUCTHINH.NET | Thiết kế và phát triển bởi P.A Việt Nam