Thiết Bị
Nhóm Sản Phẩm
DPA 4099
DPA 4099 Instrument Microphone
| Stock | 20 pcs |
| SERIAL # | |
| LINK | https://www.dpamicrophones.com/instrument/4099-instrument-microphone |
Xem chi tiết
Ẩn thông tin
DPA 4099 Instrument Microphone
• Directional pattern: Cardioid
• Principle of operation: Pressure gradient
• Cartridge type: Pre-polarized condenser
• Frequency response: 20 Hz - 20 kHz
• Effective frequency range, ±2 dB, at 30 cm (11.8 in): 40 Hz - 20 kHz
• Sensitivity, nominal, ±2 dB at 1 kHz: 10 mV/Pa; -40 dB re. 1 V/Pa
• Equivalent noise level, A-weighted: Typ. 18 dB(A) re. 20 µPa (max. 20 dB(A))
• Equivalent noise level, ITU-R BS.468-4: Typ. 25 dB (correct with the attenuator in 0 dB or -20 dB setting)
• Distortion, THD < 1%: 136 dB SPL RMS, 139 dB SPL peak
• Dynamic range: Typ. 121 dB
• Max. SPL, THD 10%: 159 dB SPL peak
• Switchable attenuator, filters etc.: 0 dB / -20 dB
• Rated output impedance: 200 Ω
• Minimum load impedance: 2 kΩ
• Cable drive capability: 100 m (328 ft)
• Output balance principleImpe: dance balancing with Active Drive
• Common mode rejection ratio (CMRR): > 60 dB
• Power supply (for full performance): P48 (Phantom Power)
• Current consumption: 2.8 mA
• Connector: XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
• ColorMatte: black
• Weight: 158 g (5.6 oz)
• Microphone diameter: 19 mm (0.75 in)
• Capsule diameter: 19 mm (0.75 in)
• Microphone length: 170 mm (6.7 in)
• Maximum output voltage, RMS: > 5 V
• Polarity: +V at pin 2 for positive sound pressure
• Temperature range: -40°C to 45°C (-40°F to 113°F)
• Relative humidity (RH): Up to 90%
• Matching tolerance (frequency response and sensitivity): ±1 dB
• Phase deviation for kit: < 10°
DPA 4011
DPA 4011
| Stock | 2 pcs |
| SERIAL # | |
| LINK | https://www.dpamicrophones.com/pencil/4011-cardioid-microphone |
Xem chi tiết
Ẩn thông tin
DPA 4011
• Directional patternCardioid
• Principle of operationPressure gradient
• Cartridge typePre-polarized condenser
• Frequency response20 Hz - 20 kHz
• Effective frequency range, ±2 dB, at 30 cm (11.8 in)40 Hz - 20 kHz
• Sensitivity, nominal, ±2 dB at 1 kHz10 mV/Pa; -40 dB re. 1 V/Pa
• Equivalent noise level, A-weightedTyp. 18 dB(A) re. 20 µPa (max. 20 dB(A))
• Equivalent noise level, ITU-R BS.468-4Typ. 25 dB (correct with the attenuator in 0 dB or -20 dB setting)
• Distortion, THD < 1%136 dB SPL RMS, 139 dB SPL peak
• Dynamic rangeTyp. 121 dB
• Max. SPL, THD 10%159 dB SPL peak
• Switchable attenuator, filters etc.0 dB / -20 dB
• Rated output impedance200 Ω
• Minimum load impedance2 kΩ
• Cable drive capability100 m (328 ft)
• Output balance principleImpedance balancing with Active Drive
• Common mode rejection ratio (CMRR)> 60 dB
• Power supply (for full performance)P48 (Phantom Power)
• Current consumption2.8 mA
• ConnectorXLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
• ColorMatte black
• Weight158 g (5.6 oz)
• Microphone diameter19 mm (0.75 in)
• Capsule diameter19 mm (0.75 in)
• Microphone length170 mm (6.7 in)
• Maximum output voltage, RMS> 5 V
• Polarity+V at pin 2 for positive sound pressure
• Temperature range-40°C to 45°C (-40°F to 113°F)
• Relative humidity (RH)Up to 90%
• Matching tolerance (frequency response and sensitivity)±1 dB
• Phase deviation for kit< 10°
AKG C1000S
AKG C1000S
| Stock | 4 pcs |
| SERIAL # | |
| LINK | https://www.akg.com/Microphones/Condenser%20Microphones/C1000_S.html |
Xem chi tiết
Ẩn thông tin
AKG C1000S
• Cardioid/ hyper cardioid (changeable with PPC)
• Operates with 48V phantom power or 2x 1.5 V AA battery
• Switch with battery LED
• Plug on HF shelf with PB-1000
• Frequency range: 50 Hz - 20 kHz
• Electric impedance: 200 Ohm
• Sensitivity: 6 mV/ Pa (-44 dBV)
• Max. SPL: 137 dB
• Diameter: 34 mm
• Length: 220 mm
• Weight: 275 g
• Colour: black
• Incl. transport bag, wind shield and clamp
AKG C411
AKG C411
| Stock | 2 pcs |
| SERIAL # | |
| LINK | https://www.akg.com/Microphones/Condenser%20Microphones/C411PP.html |
Xem chi tiết
Ẩn thông tin
AKG C411
• Type: Pre-polarized condenser transducer
• Polar: PatternFigure of eight
• Audio frequency bandwidth: 10 - 18000 Hz
• Sensitivity: 2 mV/Pa
• Electrical impedance: 200 Ohms
• Recommended load impedance: 1000 Ohms
• Max. SPL for 1%/3% THD: 96 dB / 103 dB
• Current consumption: approx. 2.2 mA
• Audio Output: Type: Mini XLR
• Gender: Female
• Contacts: 3-pin
• Dimensions: Length: 9.7 mm
• Width: 14.2 mm
• Height: 26.7 mm
• Net Weight: 18 g (0.6 oz.)
• Cable length: 1.5 m (5 ft.)
• Design: Body: plastic
• Finish: matte black
• Powering Interface: Voltage: 9 to 52 V
• Current: 2 mA
• Application: Live Instrument: Yes
• Instrument: Piano / Strings: Yes
AKG DRUM SET Big II
AKG DRUM SET Big II
| Stock | 1 set |
| SERIAL # | |
| REMARKS | AKG DRUM SET Big II |
| LINK | https://www.akg.com/support/DrumSetBig_.html |
Xem chi tiết
Ẩn thông tin
AKG DRUM SET Big II
• The Drum Set Big II reference drum microphone set contains everything you need to professionally mike up or record a drum kit. The included microphones represent a “best of” selection containing legendary AKG mics for drummers and other instrument-miking
• 1 x D112 bass drum microphone
• 2 x C1000 S for overheads and more
• 4 x C518 M for toms and snare
• The D112 has earned a well-deserved reputation worldwide as the best kick-drum microphone ever made. The versatile C1000 S is ideally suited for all kinds of recording and live-sound applications. The C518 M is the ultimate miniature condenser microphone
• This complete set comes in a protective aluminum carrying case.
• Feature
• Best of drum microphone kit includes one kick-drum, two overhead and four clip-on microphones
• Roadworthy, rugged aluminum carrying case for easy transport and storage
• Complete with all microphone clamps and stand adapters for plug and play
SHURE SM58
SHURE SM58
| Stock | 10 pcs |
| SERIAL # | |
| LINK | https://www.shure.com/en-US/products/microphones/sm58 |
Xem chi tiết
Ẩn thông tin
SHURE SM58
• Type: Dynamic
• Frequency Response: 50 to 15,000 Hz
• Polar Pattern: Cardioid
• Sensitivity (at 1,000 Hz Open circuit voltage) : –54.5 dBV/Pa (1.85 mV) 1 Pa = 94 dB SPL
• Impedance: Rated impedance is 150 Ω (300 Ω actual) for connection to microphone inputs rated low impedance
• Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
• Case: Dark gray, enamel-painted, die cast metal; matte-finished, silver colored, spherical steel mesh grille
• Connector: Three-pin professional audio connector (male XLR type)
• Weight: Net: 298 g
• Dimensions: 162 mm L x 51 mm W
SHURE BETA 91A
SHURE BETA 91A
| Stock | 1 pc |
| SERIAL # | |
| LINK | https://www.shure.com/en-US/products/microphones/beta_91a |
Xem chi tiết
Ẩn thông tin
SHURE BETA 91A
• Cartridge Type Electret Condenser
• Polar Pattern: Half-cardioid (cardioid in hemisphere above mounting surface)
• Frequency Response: 20 to 20,000 Hz
• Output Impedance @ 1 kHz : 146 Ω
• Sensitivity open circuit voltage, @ 1 kHz, typical : –48.5 dBV/Pa[1] (3.8 mV)
• Maximum SPL 1 kHz at 1% THD[2] : 2500 Ω load 155 dB, 1000 Ω load 151 dB
• Signal-to-Noise Ratio: 64.5 dB
• Dynamic Range @ 1 kHz: 2500 Ω load 125.5 dB, 1000 Ω load 121.5 dB
• Clipping Level 20 Hz to 20 kHz, 1% THD : 2500 Ω load 12.5 dBV, 1000 Ω load 7.5 dBV
• Self Noise equivalent SPL, A-weighted, typical: 29.5 dB SPL-A
• Common Mode Rejection 20 Hz to 200 kHz : ≥55 dB
• Frequency Contour Switch: 7 dB of attenuation centered at 400 kHz
• Connector: Three-pin professional audio (XLR), male, balanced
• Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
• Power Requirements: 11–52 V DC[4] phantom power (IEC-61938), 5.4 mA
SHURE BETA 52A
SHURE BETA 52A
| Stock | 1 pc |
| SERIAL # | |
| LINK | https://www.shure.com/en-US/products/microphones/beta_52a |
Xem chi tiết
Ẩn thông tin
SHURE BETA 52A
• Cartridge Type: Dynamic (moving coil)
• Frequency Response: 20 to 10,000 Hz
• Polar Pattern: Supercardioid
• Output Impedance: 150 Ω
• Sensitivity (at 1kHz, open circuit voltage): −64 dBV/Pa (0.6 mV) 1 Pascal=94 dB SPL
• Maximum SPL (1 kHz at 1% THD, 1kΩ load): 174 dB
• Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
• Weight: Net: 0.605 kg (1.35 lbs)
• Connector: Three-pin professional audio (XLR), male
• Case: 134 dB (159 dB, -25 Pad)
SENNHEISER e914
SENNHEISER e914
| Stock | 4 pcs |
| SERIAL # | |
| LINK | https://en-us.sennheiser.com/recording-microphone-instrument-studio-live-guitars-grand-pianos-cymbals-percussion-e-914 |
Xem chi tiết
Ẩn thông tin
SENNHEISER e914
• Dimensions Ø 24 x 157 mm
• Attenuation 0, -10, -20 dB
• Phantom powering 48 V/2,2 mA
• Connector XLR-3
• Sensitivity in free field, no load (1kHz) 7 mV/Pa
• Equivalent noise level 19 dB(A)
• Frequency response 20 - 20000 Hz
• Nominal impedance 100 Ω
• Max. Sound pressure level (active) - 137, 147 (with activated -10 db attenuation), 157 (with activated -20 db attenuation) db
• Weight 198 g
• Min. terminating impedance 1000 Ω
Copyright © 2020 PHUCTHINH.NET | Thiết kế và phát triển bởi P.A Việt Nam