PHUCTHINH.NET

Thiết Bị

LAB GRUPPEN 20K44

  • Amplifier Lab Gruppen PLM 20K44 SP

    • Amplifier Lab Gruppen PLM 20K44 SP

    Stock 16 pcs.
    SERIAL #
    LINK https://www.labgruppen.com/labgruppen/product?modelCode=P0F61
    Xem chi tiết
    Ẩn thông tin
    PLM 20K44
    • General Processing / Network Lake / Dante
    • Number of amplifier channels 4
    • Total burst power all channels (share among channels with RPM) 20000 W
    • Max output power (all channels driven)1 2 ohms 4400 W 2.67 ohms 5000 W 4 ohms 4400 W 8 ohms 2300 W 16 ohms 1150 W Hi-Z 70 V 3300 W Hi-Z 100 V 4700 W
    • Max output power single channel1 2 ohms 4400 W 2.67 ohms 5900 W 4 ohms 4600 W 8 ohms 2300 W 16 ohms 1150 W Hi-Z 70 V 3300 W Hi-Z 100 V 4700 W
    • Amplifier output modules (all models, all channels) Peak output voltage 194 V Max. output current 67 A Rational Power Management (RPM) Regardless of model, any channel has potential to deliver the max single channel output power Default voltage limi
    • Audio Performance (Amplifier platform with digital input) THD + N 20 Hz - 20 kHz for 1 W < 0.05 % THD + N at 1 kHz and 1 dB below clipping < 0.04 % Dynamic range > 114 dB Channel separation (Crosstalk) at 1 kHz > 70 dB Frequency response (1 W into
    • Lake processing Loudspeaker processing Up to 4 modules of Classic/linear-phase/FIR crossover, EQ, delay, LimiterMax™ - peak and RMS limiters System tuning Group control with Raised Cosine™ MESA EG™ asymmetric filters Input redundancy / Matrix Automat
    • Measurement & Analysis Pilot tone generation and analysis Yes Load impedance analysis Yes Real Time Analyzer (RTA), 3rd party integration Yes
    • Dante Audio Network Dante I/O 8 x 8 Network topology / redundancy Flexible topology / Supports daisy-chained and Dual redundant networks Sample Rates / Transport 48, 96 kHz / Uni + Multicast Network latency 0.25, 0.5, 1.0, 2.0, 5.0 ms
    • Device presets Local memory locations for the settings of the product 100
    • AES Inputs Inputs 4 AES inputs Supported sample rates / resolution 44.1, 48, 88.2, 96, 176.4, 192 kHz / up to 24 bits Sample rate conversion THD+N 20 Hz - 20 kHz unweighted 0.0000003
    • Analog Inputs Inputs 4 high quality inputs with Iso-Float ground isolation Maximum input / digital reference +26 dBu / +21 dBu Sampling rate / Resolution 96 kHz / 24 bit Input impedance balanced / unbalanced 20 / 10 kOhm THD+N (typical at 1 kHz un
    • Limiters Adjustable Inter-Sample Voltage Peak Limiter (ISVPL) 17.8 - 194 V, step size 0.1 V Current Peak Limiter < 300 ms 67 A peak Current Average Limiter (CAL) > 300 ms 33 Arms MaxRMS (rms voltage limiter) Yes MaxPeak (peak voltage limiter) Yes
    • Gain Amplifier gain 22 - 44 dB, step size 0.1 dB Output attenuator -Inf to 0 dB, step size 0.25 dB
    • Back panel Interface Analog, 2-channel I/O (input + link) 4 x 3-pin XLR, electronically balanced AES / EBU / I/O (input + link) 2 x 3-pin XLR Output connectors Neutrik speakON (1 x NLT8, 2 x NLT4) or 4 Binding Posts (pairs) Auto 10/100, Auto Uplink
    • Front-panel user interface Display 2.5 inch, black / white, daylight readable LCD Fault/Warning/Limit/Clip indicators RGB LEDs and detailed fault description on display Mute and soft function buttons 8 provided Standby Power button On/Standby Mute
    • Mains Power Nominal voltage 100 - 240 Volt AC 45 - 66 Hz Operating voltage 70-265 V AC Mains wall plug NEMA L5-30 "Twist lock" 125 V / 30 A, and CEE 7/7 "Schuko" 230 V / 16 A
    • Power supply features Soft start / Inrush power Yes/ Max 8 Ampere Power Factor Correction (PFC) 0.98 Regulated switch mode power supply (R.SMPS) Yes Breaker Emulation Limiter (BEL) Configurable current threshold and breaker profile BEL max current
    • Dimensions Rack rail to rear panel W: 483 mm (19"), H: 88 mm (2 U), D: 424 mm (16") Overall depth front-rear support D: 498 mm (19.6")
    • Weight Weight 17 kg (37 lbs)
    • Finish Finish Steel painted steel chassis with black painted steel / aluminum front Approvals Approvals CE, ANSI / UL 60065 (ETL), CSA C22.2 NO. 60065, FCC, PSE, RCM, BIS India

POWERSOFT X4

  • Powersoft X4-DSP

    • Powersoft X4-DSP

    Stock 24 pcs.
    SERIAL #
    REMARKS Powersoft X4-DSP
    LINK https://www.powersoft.com/en/products/touring-amps/x-series/x4
    Xem chi tiết
    Ẩn thông tin
    X4
    • Protections Fully protected circuit design with:​ Innovative failure protection aimed at keeping the system on its SOA by detecting the power delivered to speakers compared to the power drawn from mains Real-time measurement and processing of the output s
    • Power supply Suitable for Single-Phase, Two-Phase or Three-Phase operation from 85 VAC up to 440 VAC, with automatic switching and balancing​ Three-phase load balancing directly managed by the unit without the need for complex load assignments in the syst
    • Thermal dissipation* 1/8 of max output power @ 8 Ω 115 V: 1127BTU/h 230 V: 1058BTU/h 1/4 of max output power @ 8 Ω 115 V: 2124BTU/h 230 V: 1639BTU/h
    • Operating temperature range 0° – 35° C – 32° – 95° F
    • GENERAL Output power per channel Output power per channel 5200 W @ 2 Ω 3000 W @ 4 Ω 1600 W @ 8 Ω Bridge mode 10400 W @ 4 Ω 6000 W @ 8 Ω Max output voltage / current Max unclipped output voltage @8 Ω 175 Vpeak Current
    • AC MAIN POWER Power supply Universal, regulated switch mode with PFC (Power Factor Correction) Nominal power requirement 100-240 V ±10%, 50-60 Hz Operating voltage 90 V – 264 V
    • Power consumption Idle <100 W Max <3000 W
    • General Flexible routing/mixing provided by the internal 4x4 input/ output matrix, allows the user to mix and route analog and digital I/O. ​ 4 input channels with physical analog and digital AES3 connectors and optional 16-in/8-out redundant Dante™ conne
    • Monitoring Hardware monitor available for fast local diagnostics​ Real-time load impedance measurement/display for each channel​ Real-time output power measurements/display for each channel​ Mains voltage and current measurements/display
    • Digital Signal Processing TI C6000 DSP platform architecture​ AD/DA converter: dual 24bit @48 kHz Tandem® architecture, 127 dB dynamic range, per channel​ Input/output independent equalizers per channel providing Raised-cosine, custom FIR, parametric IIR:
    • Crossovers: linear phase (FIR), hybrid (FIR-IIR), Butterworth, Linkwitz-Riley, Bessel: 6 dB/oct to 48 dB/oct (IIR)​ Input delay up to 2s and output delay up to 100ms for time alignment per channel​ Active DampingControl™ for cable compensation​ Power limi
    • Remote management Control and monitoring through ArmoníaPlus​ Dedicated Web App

POWERSOFT K3 DSP

  • POWERSOFT K3 DSP

    • POWERSOFT K3 DSP

    Stock 26 pcs
    SERIAL #
    REMARKS POWERSOFT K3 DSP
    LINK https://www.powersoft.com/en/products/touring-amps/k-series/k3-dsp
    Xem chi tiết
    Ẩn thông tin
    K3 DSP
    • Output power per channel
    • GENERAL Output power per channel Output power per channel 2800 W @ 2 Ω 2600 W @ 4 Ω 1400 W @ 8 Ω Bridge mode 5600 W @ 4 Ω 5200 W @ 8 Ω Max output voltage / current Single channel mode 165 Vpeak / 102 Apeak Bridge mode 330 Vpeak
    • AC MAIN POWER Power supply Universal, regulated switch mode with PFC (Power Factor Correction) Nominal power requirement 100-240 V ±10%, 50-60 Hz Operating voltage 90 V – 264 V Power consumption / current draw Idle 115 V: 64 W – 1.12 A 230 V: 75 W –
    • THERMAL Operating temperature range 0° – 45° C – 32° – 113° F Thermal dissipation* Idle 115 V: 382 BTU/h – 96.3 kcal/h 230 V: 382 BTU/h – 96.3 kcal/h 1/8 of max output power @ 4 Ω 115 V: 836 BTU/h – 210.7 kcal/h 230 V: 836 BTU/h – 210.7 kcal/h 1/4 of
    • Power consumption / current draw Idle 115 V: 64 W – 1.12 A 230 V: 75 W – 1.3 A 1/8 of max output power @ 4 Ω 115 V: 813 W – 8 A A 230 V: 813 W – 7.4 A 1/4 of max output power @ 4 Ω 115 V: 1625 W – 14.8 A 230 V: 1625 W -7.4 A
    • Thermal dissipation*
    • Idle: 115 V: 382 BTU/h – 96.3 kcal/h, 230 V: 382 BTU/h – 96.3 kcal/h
    • 1/8 of max output power @ 4 Ω: 115 V: 836 BTU/h – 210.7 kcal/h, 230 V: 836 BTU/h – 210.7 kcal/h
    • 1/4 of max output power @ 4 Ω: 115 V: 1390 BTU/h – 350.3 kcal/h, 230 V: 1390 BTU/h – 350.3 kcal/h