PHUCTHINH.NET

Device

YAMAHA SWP1-8MMF

  • YAMAHA SWP1-8MMF

    • YAMAHA SWP1-8MMF

    Stock 1pcs
    SERIAL #
    LINK https://usa.yamaha.com/products/proaudio/network_switches/swp1/index.html
    More info
    Information Hide
    YAMAHA SWP1-8MMF
    • Number of LAN ports (1000BASE-T/100BASE-TX/10BASE-T, etherCON connector): 8
    • Number of SFP ports (1000BASE-SX, opticalCON connector): 2 (1 optical module is installed as standard)
    • Console port: 1 (RJ-45)
    • Automatic negotiation: Available
    • Auto MDI/MDI-X: Available
    • Switching capacity: 20 Gbit/s
    • Throughput: 15Mpps
    • Maximum number of MAC addresses: 16,384
    • Frame buffer : 1024 kB
    • VLAN: Port VLAN, Tag VLAN (IEEE802.1Q), Private VLAN
    • Maximum number of VLANs: 256 (VLAN ID 1-4,094) *VLAN ID 1 is the default VLAN ID.
    • IP multicast: IGMP Snooping (v1/v2/v3)
    • QoS: 8 egress queues, Policy-based QoS, Remarking (CoS, ToS, DSCP), Scheduling (SP, WRR)
    • Flow control: IEEE802.3x (Full-duplex), back pressure (Half-duplex)
    • Support functions: Storm control, HOL blocking prevention, Loop detection, ACL, SNMP agents, Link aggregation (IEEE 802.3ad LACP, Static), Spanning tree (STP*, RSTP*, MSTP), Port mirroring, Port shutdown, Link speed down shift, Packet counter, Power savin
    • DIP switches: CONFIG, VLAN PRESET
    • Indicators: Front: POWER, LED MODE×4, PORT×8×2*, SFP×2 *The LED MODE button allows the PORT lamps to be switched between indicating LINK/ACT-SPEED, STATUS, or VLAN.
    • Operating temperature range: 0° to 40°
    • Storage temperature: -20 to 60°C
    • Power supply (AC IN inlet): AC100V-240V, 50/60Hz, Internal power supply (no power switch), Power supply inlet: locking type
    • Power supply (EXT DC INPUT inlet):External power supply requirements: 24VDC±2V, 1A, XLR-4-32 type Connector
    • Maximum power consumption: 11 W, 0.21 A
    • Heat dissipation: 9.5 kcal/h
    • Chassis: Metal case, no fan
    • Hazardous substances management: RoHS compliant
    • Dimensions:
    • + W: 480mm
    • + H: 44mm
    • + D: 362 mm
    • Weight: 4,2 kg
    • Accessories: Power code, Owner's manual
    • Options: MMF-SWP1 (Optical expansion unit)

RADIAL SW8

  • RADIAL ENGINEERING SW8

    • RADIAL ENGINEERING SW8

    Stock 1 pcs
    SERIAL #
    LINK https://www.radialeng.com/product/sw8
    More info
    Information Hide
    RADIAL SW8
    • Specifications
    • Audio circuit type: Passive signal path with active relay switching
    • Transformer: Eclipse ET-DB2
    • Number of channels:8
    • Frequency response: 20Hz ~ 20KHz
    • Dynamic range: >120dB
    • Gain: -20dB
    • Total harmonic distortion: 0.002%
    • Intermodulation Distortion: >0.002%
    • Phase Deviation: -2° @ 20Hz
    • Input Impedance: 140k Ohms, balanced
    • Output Impedance: 150 Ohms, balanced
    • Common Mode Rejection Ratio: -112dB at 50/60Hz
    • Equivalent Input Noise: -95dBu
    • Noise: -115dBu
    • Maximum Input: 26dBu
    • Features
    • Input pad, Ground lift, Remote Footswitch
    • Input Connectors: 1/4" TRS, D-sub
    • Output Connectors: XLR, D-sub
    • Extras: Contact Alarm Input, JR-2 XLR
    • General
    • Construction: 14 gauge steel chassis & outer shell
    • Size (L x W x D): 17.5" x 6" x 1.75" (44.5cm x 15.25cm x 4.5cm)
    • Weight: 9.2 lb (4.2kg)
    • Shipping size (L x W x D): 22" x 10.375" x 4.5" (55.9cm x 26.4cm x 11.4cm)
    • Shipping weight: 9.7 lb (4.4 kg)
    • Power: Two +15VDC/400mA power supplies included
    • Conditions: For use in dry locations only between 5°C and 40°C
    • Warranty: Radial 3-year, transferable

ARX MSX48

  • ARX MSX48

    • ARX MSX48

    Stock 6 pcs
    SERIAL #
    LINK http://www.arx.com.au/worldwide/msx48.htm
    More info
    Information Hide
    ARX MSX48
    • Input Impedance 300 Ohms
    • Output Impedance 2 secondaries @ 600 Ohms each
    • Frequency Response 30Hz - 20 KHz ± 1dB
    • Maximum Output Level + 20dBm
    • THD at Max Output 0.2% 30 Hz - 20KHz @ 20dBm
    • Insertion Loss 0.5dB @ 1 KHz (600 Ohm source & load)
    • Input Connectors 3 pin female XLR wired Pin 2 + Hot, Pin 3 – Cold
    • Main Output 3 Pin male XLR wired Pin 2 + Hot, Pin 3 – Cold
    • Monitor & Aux Output 3 pin male XLR wired Pin 2 + Hot, Pin 3 – Cold. Audio grounds not connected; Pin 1 is floating.
    • Weight 13.5 lbs (6 Kg)

RADIAL PRO DI

  • RADIAL PRO DI

    • RADIAL PRO DI

    Stock 6 pcs
    SERIAL #
    LINK https://www.radialeng.com/product/prodi
    More info
    Information Hide
    RADIAL PRO DI
    • Audio circuit type: Passive, transformer based
    • Transformer: Eclipse ET-DB2, 12:1 ratio
    • Number of channels: Single channel (mono)
    • Frequency response: 20Hz ~ 18.5KHz (± 0.2dB)
    • Dynamic range: 128dB
    • Total harmonic distortion: 0.01% from 20Hz~20kHz @-10dB
    • Phase Deviation: 1° @ 100Hz; 8° @ 20Hz
    • Input Impedance: 140k Ohms, unbalanced
    • Output Impedance: 150 Ohms, balanced
    • Maximum Input: +18dB @ 20Hz
    • Input pad, Ground lift
    • Input Connectors: 1/4" in & thru
    • Output Connectors: XLR-M out
    • Construction: 14 gauge steel chassis & outer shell
    • Size (L x W x D): 4.25” x 2.75” x 1.75" (108 x 70 x 44mm)
    • Weight: 1.2lb (0.54kg)
    • Shipping size (L x W x D): 6.5" x 4" x 3" (165 x 76 x 102mm)
    • Shipping weight: 1.35lb (0.61kg)
    • Power: Passive, no power required
    • Conditions: For use in dry locations only between 5°C and 40°C
    • Warranty: Radial 3-year, transferable

RADIAL PRO D2

  • RADIAL PRO D2

    • RADIAL PRO D2

    Stock 4 pcs
    SERIAL #
    LINK https://www.radialeng.com/product/prod2
    More info
    Information Hide
    RADIAL PRO D2
    • Audio circuit type: Passive, transformer based
    • Transformer: Eclipse ET-DB2, 12:1 ratio
    • Number of channels: 2
    • Frequency response: 20Hz ~ 18.5KHz (± 0.2dB)
    • Dynamic range: 128dB
    • Total harmonic distortion: 0.01% from 20Hz~20kHz @-10dB
    • Phase Deviation: 1° @ 100Hz; 8° @ 20Hz
    • Input Impedance: 140k Ohms, unbalanced
    • Output Impedance: 150 Ohms, balanced
    • Maximum Input: +18dB @ 20Hz
    • Features
    • Input pad, 180° polarity reverse, Ground lift
    • Input Connectors: 1/4"
    • Output Connectors: XLR, 1/4" thru
    • General
    • Construction: 14 gauge steel chassis & outer shell
    • Size (L x W x D): 5" x 3.3" x 1.8" (127mm x 84.1mm x 45.5mm)
    • Weight: .54kg (1.2lbs)
    • Shipping size (L x W x D): 6.5" x 4" x 3" (165mm x 102mm x 76mm)
    • Shipping weight: 0.61 kg (1.35 lbs)
    • Power: Passive, no power required
    • Conditions: For use in dry locations only between 5°C and 40°C
    • Warranty: Radial 3-year, transferable

KLARK TECHNIK DN200

  • KLARK TECHNIK DN200

    • KLARK TECHNIK DN200

    Stock 2 pcs
    SERIAL #
    LINK https://www.klarkteknik.com/product.html?modelCode=P0E3G
    More info
    Information Hide
    KLARK TECHNIK DN200
    • Inputs: Type: Active electronic, balanced or unbalanced
    • Impedance: 1 MΩ nominal, balanced or unbalanced (¼ " TRS connectors), 20 kΩ (XLR input, RCA Phono input)
    • Connectors: 2 Neutrik Combo XLR/¼ " TRS input connectors with parallel linked RCA Phono input connectors and ¼ " TRS linked outputs connectors
    • Maxmum: level +30 dBu (with pad enabled)
    • Attenuator 20 dB pad
    • Outputs: Type: Transformer balanced
    • Impedance: 75 Ω
    • Connector: 3 pin XLR
    • Max. Level: +10 dBu with load >2 kΩ
    • Min. load: 600 Ω
    • Performance: Noise: -100 dBu, 20 Hz to 20 kHz unweighted, with input terminated by 10 kΩ resistor
    • Frequency response: +0.5/-1 dB 20 Hz to 20 kHz
    • Distortion (THD+N): <0.01% @ 1 kHz, +4 dBu
    • Power Requirement: Voltage: +48 V Phantom*
    • Current consumption: <20 mA (Both channels)
    • Weight: Net: 0.95 kg
    • Dimensions: Length: 143 mm (5.6 inch)
    • Width: 106 mm (4.2 inch)
    • Height: 59.2 mm (2.3 inch)

TELEGARTNER OPTICAL 200M

  • TELEGARTNER OPTICAL 200M

    • TELEGARTNER OPTICAL 200M

    Stock 2 pcs
    SERIAL #
    LINK https://www.telegaertner.com/en/info/highlights/fo-cables-drum/fo-outdoor-cables/
    More info
    Information Hide
    TELEGARTNER OPTICAL 200M
    • Cable construction: FO universal cable A/I-DQ(ZN)BH
    • Cable jacket: LSZH, jacket colour yellow (Singlemode) or orange (Multimode), UV resistent
    • Fiber type: Singlemode OS2, Multimode OM1, OM2, OM3, OM4
    • Fiber count: 4, 6, 8, 12, 24, 48 fibers
    • Put-up: 2,000 m on single-use plywood reel
    • Outdoor cable A-DQ(ZN)B2Y
    • Cable construction: FO outdoor cable, A-DQ(ZN)B2Y
    • Cable jacket: PE, jacket colour black, UV resistent
    • Fiber type: Singlemode OS2, Multimode OM2, OM3, OM4
    • Fiber count: 4, 6, 8, 12, 24, 48 fibers
    • Put-up: 2,000 m on single-use plywood reel

GRAVITY MS4321B

  • GRAVITY MS4321B

    • GRAVITY MS4321B

    Stock 20 pcs
    SERIAL #
    LINK https://www.gravitystands.com/en/products/microphone-stands/2907/ms-4321-b?c=611
    More info
    Information Hide
    Specifications GRAVITY MS4321B
    • Product type: Stands and Tripods
    • Type: Microphone Stands
    • Tubing material: Steel
    • Tubing colour: Black
    • Tubing surface: Powder coated
    • Min. height: 1030 mm
    • Max. height: 1690 mm
    • Transport length: 1050 mm
    • Height adjustment: Yes
    • Base type: Tripod
    • Base material Zinc die-cast
    • Boom model: 2-point adjustment
    • Boom length: 790 mm
    • Interchangeable rings: 1 x 25 mm , 2 x 15 mm , 4 x 20 mm
    • Black ring pack included: Yes
    • Weight: 2,7 kg

GRAVITY MS4322B

  • GRAVITY MS4322B

    • GRAVITY MS4322B

    Stock 20 pcs
    SERIAL #
    LINK https://www.gravitystands.com/en/products/microphone-stands/2909/ms-4322-b?c=611
    More info
    Information Hide
    Specifications GRAVITY MS4322B
    • Product type: Stands and Tripods
    • Type: Microphone Stands
    • Tubing material: Steel
    • Tubing colour: Black
    • Tubing surface: Powder coated
    • Min. height: 1030 mm
    • Max. height: 1690 mm
    • Transport length: 1050 mm
    • Height adjustment: Yes
    • Base type: Tripod
    • Base material : Zinc die-cast
    • Boom model: 2-point adjustment
    • Boom length: 880 mm
    • Interchangeable rings: 1 x 25 mm , 2 x 15 mm , 4 x 20 mm
    • Black ring pack included: Yes
    • Weight: 2,7 kg

GRAVITY MS4222B

  • GRAVITY MS4222B

    • GRAVITY MS4222B

    Stock 10 pcs
    SERIAL #
    LINK https://www.gravitystands.com/en/products/microphone-stands/2899/ms-4222-b?c=611
    More info
    Information Hide
    Specifications GRAVITY MS4222B
    • Product type: Stands and Tripods
    • Type: Microphone Stands
    • Tubing material: Steel
    • Tubing colour: Black
    • Tubing surface: Powder coated
    • Min. height: 510 mm
    • Max. height: 740 mm
    • Transport length: 650 mm
    • Height adjustment: Yes
    • Base type: Tripod
    • Base material: Zinc die-cast
    • Boom model: 2-point adjustment
    • Boom length: 880 mm
    • Interchangeable rings: 1 x 25 mm , 2 x 15 mm , 4 x 20 mm
    • Black ring pack included: Yes
    • Weight: 2,2 kg

GRAVITY KSX 2

  • GRAVITY KSX 2

    • GRAVITY KSX 2

    Stock 4 pcs
    SERIAL #
    LINK https://www.gravitystands.com/en/products/keyboard-stands/2859/ksx-2?c=629
    More info
    Information Hide
    Specifications GRAVITY KSX 2 Keyboard Stand
    • Product type: Stands and Tripods
    • Type: Keyboard stands
    • Material: Steel
    • Surface: Powder coated
    • Color: Black
    • Decks: 1
    • Max. support depth: 400 mm
    • Min height: 100 mm
    • Max height: 900 mm
    • Max load (support): 65 kg
    • Interchangeable rings: 1 x 15 mm , 4 x 20 mm , 4 x 30 mm
    • Black ring pack included: Yes
    • Weight: 4,45 kg