PHUCTHINH.NET

Device

MIXER DIGITAL

  • YAMAHA Mixer Digital QL5

    • YAMAHA Mixer Digital QL5

    Stock 2 pcs
    SERIAL #
    LINK https://usa.yamaha.com/products/proaudio/mixers/cl_series/index.html
    More info
    Information Hide
    YAMAHA Mixer Digital QL5
    • 32 + 2 fader configuration adapts to a wide range of channel layouts. The QL5 is a compact console with large-scale capabilities. Mix channels: 64 mono, 8 stereo. Busses: 16 mix, 8 matrix (Input to Matrix supported). Local I/O: 32 in, 16 out. Fader confi
    • Input channels: 72 mono, 8 stereo.
    • Fader configuration: 16-fader left section, 8-fader Centralogic section, 8-fader right section, 2-fader master section .
    • Stainless steel stay for iPad support.
    • Built-in meter bridge.
  • YAMAHA PW800W

    • YAMAHA PW800W

    Stock 2 pcs
    SERIAL # YAMAHA PW800W
    LINK https://usa.yamaha.com/products/proaudio/mixers/cl_series/index.html
    More info
    Information Hide
    YAMAHA PW800W
    • The PW800W is extremely compact and lightweight (3U, 10kg). Thanks to its high efficiency, the low speed cooling fans are extremely quiet. PW800W can be added as a redundant power supply for CL Series or M7CL. When using with PM5D, two units can be serial
  • YAMAHA RPio622

    • YAMAHA RPio622

    Stock 2 pcs
    SERIAL #
    LINK https://usa.yamaha.com/products/proaudio/mixers/rivage_pm/components.html#product-tabs
    More info
    Information Hide
    YAMAHA RIVAGE PM RPio622
    • Six RY card slots that enable you to expand analog inputs and outputs, and/or digital inputs and outputs.
    • Two HY card slots that are capable of transmitting/receiving up to 256 ins/outs of digital audio signals/control signals.
    • HY card slot 1 features 256 ins/outs, and HY card slot 2 features 128 ins/outs.
    • Two mini-YGDAI slots to support various audio formats.
    • Dual redundant power supply built-in
    • Power consumption: 300W
    • Dimensions (WxHxD): 480 x 455 x 489.7mm (18.9" x 17.9" x 19.3") (10U rack size)
    • Net Weight: 30 kg (66 lbs)
  • YAMAHA RIVAGE PM DSP-RX-EX

    • YAMAHA RIVAGE PM DSP-RX-EX

    Stock 1 pcs
    SERIAL #
    LINK https://usa.yamaha.com/products/proaudio/mixers/rivage_pm/components.html#product-tabs
    More info
    Information Hide
    YAMAHA RIVAGE PM DSP-RX-EX
    • Compatible Control Surfaces: CS-R10, CS-R10-S, CS-R5, CS-R3
    • Superior capability of processing digital audio signals of up to 288 input, 72 MIX, 36 MATRIX, and two STEREO channels.
    • Four HY card slots that are capable of transmitting/receiving up to 256 ins/outs of digital audio signals/control signals.
    • Two Mini-YGDAI slots to support various audio formats.
    • Dual redundant power supply built-in
    • Power consumption: 190W
    • Dimensions (WxHxD): 480 x 220 x 491mm (18.9" x 8.7" x 19.3") (5U rack size)
    • Net Weight: 20 kg (44.1 lbs)
  • YAMAHA PM5

    • YAMAHA PM5

    Stock 1 pcs
    SERIAL #
    LINK https://usa.yamaha.com/products/proaudio/mixers/rivage_pm/index.html
    More info
    Information Hide
    Yamaha Rivage PM5
    • RIVAGE PM5 Mixing System packs undiluted RIVAGE PM power and performance into a lightweight, intuitive console that is surprisingly slim. The addition of a third display screen has made it possible to offer a more touch-centric interface in a compact, sig
    • Displays: 15" touch panel x 3
    • Fader Bays: 12-faders x 3 bays
    • Selected channels: Dynamics, GAIN, HPF, EQ, PAN, Function Knob
    • Channel Encoder: Yes
    • Channel Name / Color Display: Yes
    • Custom Fader Banks: Yes (6 x 5 on each bay)
    • User Defined Keys: 12 (x 4 banks)
    • User Defined Knobs: 3 (4 x 4 banks can be assigned)
    • Touch and Turn Knobs: Yes (3)
    • Weight: CS-R5: 92.6lbs/ 42kg
  • Yamaha CL5 Digital Mixing Console

    • Yamaha CL5 Digital Mixing Console

    Stock 2 pcs
    SERIAL #
    LINK https://usa.yamaha.com/products/proaudio/mixers/cl_series/index.html
    More info
    Information Hide
    CL5
    • With a three-section fader layout for efficient hands-on control, the CL5 is the ideal choice for a diverse spectrum of live sound systems. Input channels: 72 mono, 8 stereo. Fader configuration: 16-fader left section, 8-fader Centralogic section, 8-fade
    • Channels:32 + 2 master faders, 72 mono channel mixing plus 8 stereo channels
    • Inputs – Mic Preamps:8 x XLR
    • Phantom Power:8
    • Outputs – Other:8 x XLR (line out)
    • Inputs – Digital:2 x RJ-45 (Dante)
    • Outputs – Digital:2 x RJ-45 (Dante), 1 x XLR (AES/EBU)
    • Busses/Groups:16 send Mix bus, 8 send Matrix bus
    • Channel Inserts:Internal
    • Talkback:1 x XLR
    • MIDI I/O:In/Out
    • Data I/O:1 x D-Sub GPI (15-pin female), 1 x Ethernet
    • USB:1 x USB Type A
    • Computer Connectivity:Ethernet
    • I/O Expansion Slots:3 x Card slots available (DSP cards or mini-YGDAI cards)
    • Headphones:1 x 1/4″
    • Word Clock:In/Out
    • Faders:26 x 100mm faders
    • EQ Bands:4-band parametric channel EQ, 31-band Graphic EQ, 15-band flex EQ,
    • Effects:Reverbs, Delays, Modulation, Premium Rack compressor modeling and more
    • DAW Control:Yes (via Dante)
    • Height:11.75″
    • Depth:26.25″
    • Width:41.5″
    • Weight:79.4 lbs.
    • Manufacturer Part Number:CL5
  • Solid State Logic ML 32.32 Analogue Stagebox

    • Solid State Logic ML 32.32 Analogue Stagebox

    Stock 2 pcs
    SERIAL #
    LINK https://www.solidstatelogic.com/products/madi
    More info
    Information Hide
    Solid State Logic ML 32.32 Analogue Stagebox
    • Redundant: PSU, MADI ports, Dante Ports, Sync In - Full Spec Redundancy
    • Virtual Headphone Patch- 4 location Monitoring and Signal Present Metering to truly replace your patch bay with a digital network while retaining confidence and fault finding tools
    • Bi-directional sample rate conversion between any asynchronous sample rates, from 44.1kHz to 192kHz
    • Bi-directional combine/split mode
    • Interface between MADI and IP Audio Networks using Dante
    • GPIO connectivity - embed tallies across the network
    • GPIO connectivity - embed tallies across the network
    • Word Clock out - Clock a MADI device to the Dante Network
    • Lockout Mode - Prevent accidental alteration of front panel settings
  • Yamaha RIO3224-D2

    • Yamaha RIO3224-D2

    Stock 2 pcs
    SERIAL #
    LINK https://usa.yamaha.com/products/proaudio/interfaces/r_series_adda_2/index.html
    More info
    Information Hide
    YAMAHA RIO3224-D2
    • Type: Stage Box Remote Interface
    • Compatibility: Rivage PM7 Mixing System, CL Digital Mixer, QL Digital Mixer
    • Channels: 32 x 16 (analog), 32 x 24 (including AES/EBU)
    • Inputs - Mic Preamps: 32 x XLR
    • Phantom Power: Yes (remote on/off)
    • Outputs - Main: 16 x XLR (line out)
    • Outputs - Digital: 4 x XLR (AES/EBU)
    • Data I/O: 2 x Ethernet (Dante Primary, Secondary)
    • Software: Dante Controller, R Remote Application
    • Rackmountable: Yes, 5U
    • Power Source: Dual Redundant Power Supply, 2 x Standard IEC AC inputs
    • Height: 8.6"
    • Depth: 14.2"
    • Width: 18.9"
    • Weight: 27.3 lbs.
    • Manufacturer Part Number: Rio3224-D2
  • Yamaha RIO3224-D

    • Yamaha RIO3224-D

    Stock 2 pcs
    SERIAL #
    LINK https://usa.yamaha.com/products/proaudio/interfaces/r_series_adda/index.html
    More info
    Information Hide
    Yamaha RIO3224-D
    • Sampling frequency rate:
    • Internal: 44.1kHz, 48kHz, 88.2kHz,96kHz
    • External: 44.1kHz: +4.1667%, +0.1%, -0.1%, -4.0% ( ±200ppm) /48kHz: +4.1667%, +0.1%, -0.1%, -4.0% ( ±200ppm) / 88.2kHz: +4.1667%, +0.1%, -0.1%, -4.0% ( ±200ppm) / 96kHz: +4.1667%, +0.1%, -0.1%, -4.0%
    • Signal Delay: Less than 3ms INPUT to OUTPUT, connect with CL5 using Dante, Dante Receive Latency set to 0.25ms (one way), Fs=48kHz
    • Total harmonic distortion: Less than 0.05% 20Hz-20kHz@+4dBu into 600 Ohms, Fs= 44.1kHz, 48kHz /Less than 0.05% 20Hz-40kHz@+4dBu into 600Ohms, Fs=88.2kHz, 96kHz INPUT to OUTPUT, InputGain=Min.
    • Frequency Response: +0.5, -1.5dB 20Hz-20kHz, refer to +4dBu output @1kHz, INPUT to OUTPUT, Fs=44.1kHz, 48kHz / +0.5, -1.5dB 20Hz-40kHz, refer to+4dBu output @1kHz, INPUT to OUTPUT, Fs=88.2kHz, 96kHz
    • Dynamic Range: 108dB typ., INPUT to OUTPUT, Input Gain = Min
    • Crosstalk: -100dB, adjacent INPUT/OUTPUT channels, Input Gain = Min.
    • Power requirements: US/Canada: 120V 60Hz, Japan: 100V 50/60Hz, China:110-240V 50/60Hz, Korea: 220V 60Hz, Other: 110-240V 50/60Hz
    • Power consumption: 120W
    • Dimensions (W x H x D): 18 7/8" x 9 1/4" x 14 1/4" (480 x 232 x 361.5mm)
    • Rack space: 5 RU
    • Net Weight: 27.3lb (12.4kg)
    • Operating temperature range: 0° - 40°
    • Storage temperature range: -20° - 60°
  • Solid State Logic L350 Digital Mixing Console

    • Solid State Logic L350 Digital Mixing Console

    Stock 1 pc
    SERIAL #
    LINK https://www.solidstatelogic.com/products/l350
    More info
    Information Hide
    SSL L350
    • Paths: 192 (144 full, 48 dry)
    • Fader Tiles: 2 (24 +2 faders)
    • Matrix: 4 x 32 inputs / 36 outputs
    • VCAs: 36
    • FX Slots: 48
    • FX types: 45+
    • Sample Rate: 96kHz or 48kHz
    • Local Analogue I/O: 16 mic/line, 16 line out
    • Local AES/EBU I/O: 4 pairs (with SRC)
    • MADI ports (coax/optical): 8 (1 redundant pair)
    • MADI FX loop: Optical in/out x 1
    • Blacklight: Optional redundant pair
    • Dante - IP Audio Network: Optional 32x32 redundant pair
    • Maximum I/O: 568 in/out (600 with Dante)
    • Channel Control Tile: Option
    • Main touch-screen: 19" 600 Nits
    • Power supply: Two redundant as standard
    • Width: 923mm (36.3")
    • Weight: 81kg (180lbs)

SPEAKER TW AUDIO

  • TW AUDIO C5

    • TW AUDIO C5

    Stock 24 pcs.
    SERIAL #
    LINK https://www.twaudio.de/en/product/c-series/c5-not-to-be-underestimated/
    More info
    Information Hide
    Technical data C5
    • Drivers LF: 1 × 5" HF: 1 × 1" coaxial exit with 1.75" diaphragm
    • Frequency range 90 – 20000 Hz
    • Power capacity program / peak 250 / 500 W (passive)
    • Impedance 24 Ω (passive)
    • Coverage (h × v) 110° radial
    • Sensitivity 1 W / 1 m 91 dB
    • SPLmax / 1 m 117 dB
    • Connection NL4 1±, Terminal ±
    • Dimensions (H × W × D) 240 × 160 × 160 mm [9.45 × 6.3 × 6.3 in]
    • Weight 3.9 kg [9 lbs]
    • Finish Warnex texture paint
    • Accessories BagC5, MKC5, WHC5, WPC5
    • Options RAL colors
    • Protection class IP54 (using WPC5)
  • TW AUDIO C12

    • TW AUDIO C12

    Stock 8 pcs.
    SERIAL #
    REMARKS TW AUDIO C12
    LINK https://www.twaudio.de/en/product/c-series/c12-tonal-agility/
    More info
    Information Hide
    Technical data C12
    • Drivers LF: 1 × 12" HF: 1 × 1.4" coaxial exit with 3" diaphragm
    • Frequency range 62 – 17000 Hz
    • Power capacity program / peak 700 W (bi-amp LF), 280 W (bi-amp HF) 700 / 1400 W (passive)
    • Impedance 8 Ohms (bi-amp LF), 20 Ohms (bi-amp HF) 8 Ohms (passive)
    • Coverage (h x v) in monitor use 55° × 70° HF-horn, rotatable
    • Sensitivity 1 W / 1 m 101 dB
    • SPLmax / 1 m 132 dB
    • Connection NL4 1± HF / 2± LF (bi-amp) NL4 1± (passive)
    • Dimensions (H x W x D) 348 × 445 × 500 mm [13.7 × 17.52 × 19.69 in]
    • Gewicht 19,6 kg [43 lbs]
    • Finish Warnex texture paint
    • Accessories SBC12, CaseC12, QBC12
    • Options RAL colors
  • TW AUDIO C15

    • TW AUDIO C15

    Stock 16 pcs.
    SERIAL #
    LINK https://www.twaudio.de/en/product/c-series/c15-coaxial-reference/
    More info
    Information Hide
    Technical data C15
    • Drivers LF: 1 × 15" HF: 1 × 1.4" coaxial exit with 3" diaphragm
    • Frequency range 55 – 17000 Hz
    • Power capacity program / peak 800 W (bi-amp LF), 320 W (bi-amp HF) 800 / 1600 W (passive)
    • Impedance 8 Ohms (bi-amp LF), 20 Ohms (bi-amp HF) 8 Ohms (passive)
    • Coverage (h x v) in monitor use 55° × 70° HF-horn, rotatable
    • Sensitivity 1 W / 1 m 101 dB
    • SPLmax / 1 m 133 dB
    • Connection NL4 1± HF / 2± LF (bi-amp) NL4 1± (passive)
    • Dimensions (H x W x D) 348 × 605 × 500 mm [13.7 × 23.82 × 19.69 in]
    • Weight 23,8 kg [52 lbs]
    • Finish Warnex texture paint
    • Accessories SBC15, CaseC15, QBC15
    • Options passive-biamped swichable, RAL colors
  • TW AUDIO B18

    • TW AUDIO B18

    Stock 12 pcs.
    SERIAL #
    LINK https://www.twaudio.de/en/product/b-series/b18-depth-control/
    More info
    Information Hide
    Technical data B18
    • Drivers 1 × 18"
    • Frequency range 32 – 160 Hz
    • Power capacity program / peak 2400 / 4800 W
    • Impedance 8 Ohms
    • Coverage omni
    • Sensitivity 1 W / 1 m 96 dB
    • SPLmax / 1 m 132 dB
    • Connection NL4 2± REAR, NL4 1± FRONT
    • Dimensions (H x W x D) 606 × 500 × 800 mm [23.86 × 19.69 × 31.5 in]
    • Weight 42,6  kg [94 lbs]
    • Finish Warnex texture paint
    • Accessories FDB18, QDB18, CoverB18
    • Options RAL colors
  • TW AUDIO M15

    • TW AUDIO M15

    Stock 12 pcs.
    SERIAL #
    REMARKS TW AUDIO M15
    LINK https://www.twaudio.de/en/product/m-series/m15-particularly-multifunctional/
    More info
    Information Hide
    Technical data M15
    • Power capacity program / peak 800 / 1600 W
    • Frequency range 50 – 19000 Hz
    • 1x Mackie 1604 VLZ
    • Impedance 8 Ω
    • Coverage (h × v) 75° × 50° HF-horn, rotatable
    • Sensitivity 1 W / 1 m 99 dB
    • SPLmax / 1 m 131 dB
    • Connection NL4 1±
    • Dimensions (H × W × D) 706 × 440 × 374 mm [27.8 × 17.32 × 14.72 in]
    • Weight 24.9 kg [55 lbs]
    • Finish Warnex texture paint
    • Accessories SBM15, CoverM15, CaseM15, QBM15
    • Options left and right version, RAL colors
  • TW AUDIO B30

    • TW AUDIO B30

    Stock 16 pcs.
    SERIAL #
    REMARKS TW AUDIO B30
    LINK https://www.twaudio.de/en/product/b-series/b30-hybrid-efficiency/
    More info
    Information Hide
    Technical data B30
    • Options RAL colors
    • Accessories FDB30, QDB30, CoverB30
    • Finish Warnex texture paint
    • Weight 38,7 kg [85 lbs]
    • Dimensions (H × W × D) 706 × 446 × 800 mm [27.8 × 17.56 × 31.5 in]
    • Connection NL4 2±
    • SPLmax / 1 m 133 dB
    • Sensitivity 1W / 1 m 97 dB
    • Coverage omni
    • Impedance 8 Ω
    • Power capacity program / peak 2000 / 4000 W
    • Frequency range 35 – 200 Hz
    • 1x Mackie 1604 VLZ
  • TW AUDIO T24N

    • TW AUDIO T24N

    Stock 16 pcs.
    SERIAL #
    REMARKS TW AUDIO T24N
    LINK https://www.twaudio.de/en/product/t-series/t24n-neoclassic/
    More info
    Information Hide
    Technical data T24
    • Technical data
    • Frequency range 65 – 18000 Hz
    • Power capacity program / peak 1400 / 2400 W (bi-amp LF), 220 / 400 W (bi-amp HF) 1400 / 2400 W (passive)
    • Impedance 4 Ω (bi-amp LF), 8 Ω (bi-amp HF) 4 Ω (passive)
    • Coverage (h × v) 60° × 40° or 90° ×  50° HF-horn, exchangeable, rotatable
    • Sensitivity 1 W / 1 m 107 dB (bi-amp LF), 112 dB (bi-amp HF) 110 dB (passive)
    • SPLmax / 1 m 143 dB
    • Connection NL4 1± HF / 2± LF (bi-amp) NL4 1± (passive)
    • Dimensions (H × W × D) 706 × 440 × 440 mm [27.8 × 17.32 × 17.32 in]
    • Weight 33 kg [73 lbs]
    • Finish Warnex texture paint
    • Accessories HornT24-90, CaseT24, CoverT24, FDB30, SBT24, CBT24, BLT24, MCT24, BAT24, BBT24, BCT24
    • Options RAL colors
  • TW AUDIO BSX

    • TW AUDIO BSX

    Stock 32 pcs.
    SERIAL #
    LINK https://www.twaudio.de/en/product/b-series/bsx-serious-low-throw/
    More info
    Information Hide
    Technical data BSX
    • Power capacity program / peak 2 × 3600 W / 2 × 7200 W
    • Frequency range 27 – 120 Hz
    • Drivers 2 × 21"
    • Coverage omni
    • Impedance 2 × 4 Ω
    • Sensitivity 1 W / 1 m 99 dB
    • SPLmax / 1 m 142 dB
    • Connection Driver 1: NL4 2± Driver 2: NL4 1±
    • Dimensions (H × W × D) 606 × 1406 × 900 mm (without castors) [23.86 × 55.35 × 35.43 in]
    • Weight 109 kg [240 lbs]
    • Finish Polyurea coating
    • Accessories FDBSX, CoverBSX
    • Options RAL colors (Warnex texture paint)
  • TW AUDIO VERA S33

    • TW AUDIO VERA S33

    Stock 32 pcs
    SERIAL #
    REMARKS TW AUDIO VERA S33
    LINK https://www.twaudio.de/en/product/vera36-en/vera-s33-leading-the-way/
    More info
    Information Hide
    Technical data VERA S33
    • Options RAL colors (Warnex texture paint)
    • Accessories RF900, LA900, ORF900, BLS, QDB30, Cover2S33
    • Finish Polyurea coating
    • Weight 67,2 kg [148 lbs]
    • Dimensions (H x W x D) 606 × 700 × 800 mm [23.86 × 27.56 × 31.5 in]
    • Connection NL4 1±= 15" NL4 2± = 18"
    • SPLmax / 1 m 134 dB
    • Sensitivity 1 W / 1 m 99 dB
    • Coverage cardioid / hypercardioid
    • Power capacity program / peak 2400 / 4800 W 18" 2000 / 4000 W 15"
    • Frequency range 33 – 120 Hz
    • Drivers 1 × 18" FRONT 1 × 15" REAR
    • Impedance 8 Ohms 18" 8 Ohms 15"
  • VERA36

    • VERA36

    Stock 80 pcs.
    SERIAL #
    LINK https://www.twaudio.de/en/product/vera36-en/vera36-taking-acoustics-a-step-further
    More info
    Information Hide
    Technical data VERA36
    • Drivers: LF: 2 × 10" MF: 2 × 8" HF: 2 × 1.4" exit with 3" diaphragm
    • Frequency range 60 - 16000 Hz
    • Power capacity program / peak 1000 / 2000 W LF 800 / 1600 W MHF
    • Impedance 8 Ω LF 8 Ohms MHF
    • Coverage (h × v) 80° or 120° × 10°
    • Sensitivity 1 W / 1 m 98 dB LF 110 dB MHF
    • SPLmax / 1 m 141 dB
    • Connection NL4 1± MHF NL4 2± LF
    • Dimensions (H × W × D) 310 × 700 × 580 mm [12.2 × 27.56 × 22.83 in]
    • Weight 41.6 kg [92 lbs]
    • Finish Polyurea coating
    • Accessories RF900, LA900, ORF900, GSK36, DLV36, CoverV36
    • Options RAL colors (Warnex texture paint)

SPEAKER JBL

  • JBL PRX 815W

    • JBL PRX 815W

    Stock 24 pcs.
    SERIAL #
    LINK https://jblpro.com/products/prx815
    More info
    Information Hide
    Specifications PRX815
    • System Type Self Powered 15”, two-way, bass-reflex
    • Maximum SPL (1m) Normal: 137 dB Boost: 137 dB
    • Frequency Response (-10dB) Main: 42.9 Hz - 19.5 kHz Monitor: 43.6 Hz - 19.3 kHz
    • Frequency Response (±3 dB) Main: 58.1 Hz - 17.2 kHz Monitor: 60.7 Hz - 16.7 kHz
    • Inputs 2 x Balanced XLR / 1/4 inch input, 2 x unbalanced RCA input
    • Input Impedance 20K Ohms (balanced), 10K Ohms (unbalanced)
    • Signal Indicators Limit: Yellow LED indicates peak output has been reached and dsp limiter is acting Signal: Green LED indicates signal present Power: Blue indicates system has power and ready to pass audio
    • EQ User selectable presets for Main or Monitor position, Advanced EQ settings available using Wi-Fi and PRX Connect application
    • Dynamic Control (Input) dbx Type IV™ limiter circuit
    • Crossover Frequency 2 kHz
    • Design Highly efficient Class-D amplifier
    • Power Rating 1500W (750W x 2)
    • AC power input 100V - 240V ~ 50/60 Hz
    • LF Driver 1 x JBL 275G (15 in) woofer
    • HF Driver 1 x JBL 2408H-2 37.5 mm (1.5 in) annular polymer diaphragm, neodymium compression driver
    • Coverage Pattern 90° x 50° nominal
    • Directivity Index (DI) 10.2 dB
    • Directivity Factor (Q) 10.4
    • Enclosure Asymmetrical, 18 mm, Duraflex coated plywood
    • Suspension / Mounting Dual 36 mm pole socket, 12 x M10 Suspension Points
    • Transport 1 x injection molded handle with backing cup
    • Finish Obsidian DuraFlex™ finish
    • Grille Powder coated, Obsidian, 16 gauge perforated steel with acoustical transparent black cloth backing.
    • Dimensions (H x W x D) 701mm x 446mm x 359mm (27.6in x 17.5in x 14.1in)
    • Net Weight 20.86 kg (46.0 lb)
    • Gross Weight 26.3 kg (58.0 lb)
    • Mic Inputs 2
    • Phantom Power No
    • Effects 25 parametric EQ's and speaker delay
    • Outputs 1 x XLR (mix out)
  • JBL PRX825

    • JBL PRX825

    Stock 24 pcs.
    SERIAL #
    REMARKS JBL PRX825
    LINK https://jblpro.com/en/products/prx825
    More info
    Information Hide
    Specifications PRX825
    • System Type Self Powered Dual 15”, two-way, bass-reflex
    • Maximum SPL Output 138 dB peak
    • Frequency Response (-10dB) Normal: 42 Hz – 18.5 kHz Boost: 40 Hz – 18.5 kHz
    • Frequency Response (±3 dB) Normal: 49 Hz – 17 kHz Boost: 46 Hz – 17 kHz
    • Inputs 2 x Balanced XLR / 1/4 inch input, 2 x unbalanced RCA input
    • Input Impedance 20K Ohms (balanced), 10K Ohms (unbalanced)
    • Signal Indicators Limit: Yellow LED indicates peak output has been reached and dsp limiter is actingSignal: Green LED indicates signal present Power: Blue indicates system has power and ready to pass audio.
    • EQ User selectable presets for Normal or Boost, Advanced EQ settings available using Wi-Fi and PRX Connect application
    • Dynamic Control (Input) dbx Type IV™ limiter circuit
    • Crossover Frequency 2.4 kHz
    • Design Highly efficient Class-D amplifier
    • Power Rating 1500W (750W x 2)
    • AC power input 100V - 240V ~ 50/60 Hz
    • LF Driver 2 x JBL 275 (15 in) woofer
    • HF Driver 1 x JBL 2408H-2 37.5 mm (1.5 in) annular polymer diaphragm, neodymium compression driver
    • Coverage Pattern 90° x 50° nominal
    • Directivity Index (DI) 10.4 dB
    • Directivity Factor (Q) 11
    • Enclosure Trapezoidal, 18 mm, Duraflex coated plywood
    • Suspension / Mounting 8 x M10 Suspension Points, 1 x M10 pull back point
    • Transport 2x integrated handles with injection molded backing cup
    • Finish Obsidian DuraFlex™ finish
    • Grille Powder coated, Obsidian, 16 gauge perforated steel with acoustical transparent black cloth backing.
    • Dimensions (H x W x D) 1061mm x 446mm x 539mm (41.8in x 17.5in x 21.2in)
    • Net Weight 35.83 kg (79.0 lb)
    • Gross Weight 43.0 kg (95.0 lb)
    • Mic Inputs 2
    • Phantom Power No
    • Effects 25 parametric EQ's and speaker delay
    • Outputs 1 x XLR (mix out)

AMPLIFIER

  • POWERSOFT K3 DSP

    • POWERSOFT K3 DSP

    Stock 26 pcs
    SERIAL #
    REMARKS POWERSOFT K3 DSP
    LINK https://www.powersoft.com/en/products/touring-amps/k-series/k3-dsp
    More info
    Information Hide
    K3 DSP
    • Output power per channel
    • GENERAL Output power per channel Output power per channel 2800 W @ 2 Ω 2600 W @ 4 Ω 1400 W @ 8 Ω Bridge mode 5600 W @ 4 Ω 5200 W @ 8 Ω Max output voltage / current Single channel mode 165 Vpeak / 102 Apeak Bridge mode 330 Vpeak
    • AC MAIN POWER Power supply Universal, regulated switch mode with PFC (Power Factor Correction) Nominal power requirement 100-240 V ±10%, 50-60 Hz Operating voltage 90 V – 264 V Power consumption / current draw Idle 115 V: 64 W – 1.12 A 230 V: 75 W –
    • THERMAL Operating temperature range 0° – 45° C – 32° – 113° F Thermal dissipation* Idle 115 V: 382 BTU/h – 96.3 kcal/h 230 V: 382 BTU/h – 96.3 kcal/h 1/8 of max output power @ 4 Ω 115 V: 836 BTU/h – 210.7 kcal/h 230 V: 836 BTU/h – 210.7 kcal/h 1/4 of
    • Power consumption / current draw Idle 115 V: 64 W – 1.12 A 230 V: 75 W – 1.3 A 1/8 of max output power @ 4 Ω 115 V: 813 W – 8 A A 230 V: 813 W – 7.4 A 1/4 of max output power @ 4 Ω 115 V: 1625 W – 14.8 A 230 V: 1625 W -7.4 A
    • Thermal dissipation*
    • Idle: 115 V: 382 BTU/h – 96.3 kcal/h, 230 V: 382 BTU/h – 96.3 kcal/h
    • 1/8 of max output power @ 4 Ω: 115 V: 836 BTU/h – 210.7 kcal/h, 230 V: 836 BTU/h – 210.7 kcal/h
    • 1/4 of max output power @ 4 Ω: 115 V: 1390 BTU/h – 350.3 kcal/h, 230 V: 1390 BTU/h – 350.3 kcal/h
  • Powersoft X4-DSP

    • Powersoft X4-DSP

    Stock 24 pcs.
    SERIAL #
    REMARKS Powersoft X4-DSP
    LINK https://www.powersoft.com/en/products/touring-amps/x-series/x4
    More info
    Information Hide
    X4
    • Protections Fully protected circuit design with:​ Innovative failure protection aimed at keeping the system on its SOA by detecting the power delivered to speakers compared to the power drawn from mains Real-time measurement and processing of the output s
    • Power supply Suitable for Single-Phase, Two-Phase or Three-Phase operation from 85 VAC up to 440 VAC, with automatic switching and balancing​ Three-phase load balancing directly managed by the unit without the need for complex load assignments in the syst
    • Thermal dissipation* 1/8 of max output power @ 8 Ω 115 V: 1127BTU/h 230 V: 1058BTU/h 1/4 of max output power @ 8 Ω 115 V: 2124BTU/h 230 V: 1639BTU/h
    • Operating temperature range 0° – 35° C – 32° – 95° F
    • GENERAL Output power per channel Output power per channel 5200 W @ 2 Ω 3000 W @ 4 Ω 1600 W @ 8 Ω Bridge mode 10400 W @ 4 Ω 6000 W @ 8 Ω Max output voltage / current Max unclipped output voltage @8 Ω 175 Vpeak Current
    • AC MAIN POWER Power supply Universal, regulated switch mode with PFC (Power Factor Correction) Nominal power requirement 100-240 V ±10%, 50-60 Hz Operating voltage 90 V – 264 V
    • Power consumption Idle <100 W Max <3000 W
    • General Flexible routing/mixing provided by the internal 4x4 input/ output matrix, allows the user to mix and route analog and digital I/O. ​ 4 input channels with physical analog and digital AES3 connectors and optional 16-in/8-out redundant Dante™ conne
    • Monitoring Hardware monitor available for fast local diagnostics​ Real-time load impedance measurement/display for each channel​ Real-time output power measurements/display for each channel​ Mains voltage and current measurements/display
    • Digital Signal Processing TI C6000 DSP platform architecture​ AD/DA converter: dual 24bit @48 kHz Tandem® architecture, 127 dB dynamic range, per channel​ Input/output independent equalizers per channel providing Raised-cosine, custom FIR, parametric IIR:
    • Crossovers: linear phase (FIR), hybrid (FIR-IIR), Butterworth, Linkwitz-Riley, Bessel: 6 dB/oct to 48 dB/oct (IIR)​ Input delay up to 2s and output delay up to 100ms for time alignment per channel​ Active DampingControl™ for cable compensation​ Power limi
    • Remote management Control and monitoring through ArmoníaPlus​ Dedicated Web App
  • Amplifier Lab Gruppen PLM 20K44 SP

    • Amplifier Lab Gruppen PLM 20K44 SP

    Stock 16 pcs.
    SERIAL #
    LINK https://www.labgruppen.com/labgruppen/product?modelCode=P0F61
    More info
    Information Hide
    PLM 20K44
    • General Processing / Network Lake / Dante
    • Number of amplifier channels 4
    • Total burst power all channels (share among channels with RPM) 20000 W
    • Max output power (all channels driven)1 2 ohms 4400 W 2.67 ohms 5000 W 4 ohms 4400 W 8 ohms 2300 W 16 ohms 1150 W Hi-Z 70 V 3300 W Hi-Z 100 V 4700 W
    • Max output power single channel1 2 ohms 4400 W 2.67 ohms 5900 W 4 ohms 4600 W 8 ohms 2300 W 16 ohms 1150 W Hi-Z 70 V 3300 W Hi-Z 100 V 4700 W
    • Amplifier output modules (all models, all channels) Peak output voltage 194 V Max. output current 67 A Rational Power Management (RPM) Regardless of model, any channel has potential to deliver the max single channel output power Default voltage limi
    • Audio Performance (Amplifier platform with digital input) THD + N 20 Hz - 20 kHz for 1 W < 0.05 % THD + N at 1 kHz and 1 dB below clipping < 0.04 % Dynamic range > 114 dB Channel separation (Crosstalk) at 1 kHz > 70 dB Frequency response (1 W into
    • Lake processing Loudspeaker processing Up to 4 modules of Classic/linear-phase/FIR crossover, EQ, delay, LimiterMax™ - peak and RMS limiters System tuning Group control with Raised Cosine™ MESA EG™ asymmetric filters Input redundancy / Matrix Automat
    • Measurement & Analysis Pilot tone generation and analysis Yes Load impedance analysis Yes Real Time Analyzer (RTA), 3rd party integration Yes
    • Dante Audio Network Dante I/O 8 x 8 Network topology / redundancy Flexible topology / Supports daisy-chained and Dual redundant networks Sample Rates / Transport 48, 96 kHz / Uni + Multicast Network latency 0.25, 0.5, 1.0, 2.0, 5.0 ms
    • Device presets Local memory locations for the settings of the product 100
    • AES Inputs Inputs 4 AES inputs Supported sample rates / resolution 44.1, 48, 88.2, 96, 176.4, 192 kHz / up to 24 bits Sample rate conversion THD+N 20 Hz - 20 kHz unweighted 0.0000003
    • Analog Inputs Inputs 4 high quality inputs with Iso-Float ground isolation Maximum input / digital reference +26 dBu / +21 dBu Sampling rate / Resolution 96 kHz / 24 bit Input impedance balanced / unbalanced 20 / 10 kOhm THD+N (typical at 1 kHz un
    • Limiters Adjustable Inter-Sample Voltage Peak Limiter (ISVPL) 17.8 - 194 V, step size 0.1 V Current Peak Limiter < 300 ms 67 A peak Current Average Limiter (CAL) > 300 ms 33 Arms MaxRMS (rms voltage limiter) Yes MaxPeak (peak voltage limiter) Yes
    • Gain Amplifier gain 22 - 44 dB, step size 0.1 dB Output attenuator -Inf to 0 dB, step size 0.25 dB
    • Back panel Interface Analog, 2-channel I/O (input + link) 4 x 3-pin XLR, electronically balanced AES / EBU / I/O (input + link) 2 x 3-pin XLR Output connectors Neutrik speakON (1 x NLT8, 2 x NLT4) or 4 Binding Posts (pairs) Auto 10/100, Auto Uplink
    • Front-panel user interface Display 2.5 inch, black / white, daylight readable LCD Fault/Warning/Limit/Clip indicators RGB LEDs and detailed fault description on display Mute and soft function buttons 8 provided Standby Power button On/Standby Mute
    • Mains Power Nominal voltage 100 - 240 Volt AC 45 - 66 Hz Operating voltage 70-265 V AC Mains wall plug NEMA L5-30 "Twist lock" 125 V / 30 A, and CEE 7/7 "Schuko" 230 V / 16 A
    • Power supply features Soft start / Inrush power Yes/ Max 8 Ampere Power Factor Correction (PFC) 0.98 Regulated switch mode power supply (R.SMPS) Yes Breaker Emulation Limiter (BEL) Configurable current threshold and breaker profile BEL max current
    • Dimensions Rack rail to rear panel W: 483 mm (19"), H: 88 mm (2 U), D: 424 mm (16") Overall depth front-rear support D: 498 mm (19.6")
    • Weight Weight 17 kg (37 lbs)
    • Finish Finish Steel painted steel chassis with black painted steel / aluminum front Approvals Approvals CE, ANSI / UL 60065 (ETL), CSA C22.2 NO. 60065, FCC, PSE, RCM, BIS India

MICROPHONE

  • SHURE BETA 91A

    • SHURE BETA 91A

    Stock 1 pc
    SERIAL #
    LINK https://www.shure.com/en-US/products/microphones/beta_91a
    More info
    Information Hide
    SHURE BETA 91A
    • Cartridge Type Electret Condenser
    • Polar Pattern: Half-cardioid (cardioid in hemisphere above mounting surface)
    • Frequency Response: 20 to 20,000 Hz
    • Output Impedance @ 1 kHz : 146 Ω
    • Sensitivity open circuit voltage, @ 1 kHz, typical : –48.5 dBV/Pa[1] (3.8 mV)
    • Maximum SPL 1 kHz at 1% THD[2] : 2500 Ω load 155 dB, 1000 Ω load 151 dB
    • Signal-to-Noise Ratio: 64.5 dB
    • Dynamic Range @ 1 kHz: 2500 Ω load 125.5 dB, 1000 Ω load 121.5 dB
    • Clipping Level 20 Hz to 20 kHz, 1% THD : 2500 Ω load 12.5 dBV, 1000 Ω load 7.5 dBV
    • Self Noise equivalent SPL, A-weighted, typical: 29.5 dB SPL-A
    • Common Mode Rejection 20 Hz to 200 kHz : ≥55 dB
    • Frequency Contour Switch: 7 dB of attenuation centered at 400 kHz
    • Connector: Three-pin professional audio (XLR), male, balanced
    • Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
    • Power Requirements: 11–52 V DC[4] phantom power (IEC-61938), 5.4 mA
  • SHURE BETA 52A

    • SHURE BETA 52A

    Stock 1 pc
    SERIAL #
    LINK https://www.shure.com/en-US/products/microphones/beta_52a
    More info
    Information Hide
    SHURE BETA 52A
    • Cartridge Type: Dynamic (moving coil)
    • Frequency Response: 20 to 10,000 Hz
    • Polar Pattern: Supercardioid
    • Output Impedance: 150 Ω
    • Sensitivity (at 1kHz, open circuit voltage): −64 dBV/Pa (0.6 mV) 1 Pascal=94 dB SPL
    • Maximum SPL (1 kHz at 1% THD, 1kΩ load): 174 dB
    • Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
    • Weight: Net: 0.605 kg (1.35 lbs)
    • Connector: Three-pin professional audio (XLR), male
    • Case: 134 dB (159 dB, -25 Pad)
  • SHURE SM58

    • SHURE SM58

    Stock 10 pcs
    SERIAL #
    LINK https://www.shure.com/en-US/products/microphones/sm58
    More info
    Information Hide
    SHURE SM58
    • Type: Dynamic
    • Frequency Response: 50 to 15,000 Hz
    • Polar Pattern: Cardioid
    • Sensitivity (at 1,000 Hz Open circuit voltage) : –54.5 dBV/Pa (1.85 mV) 1 Pa = 94 dB SPL
    • Impedance: Rated impedance is 150 Ω (300 Ω actual) for connection to microphone inputs rated low impedance
    • Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
    • Case: Dark gray, enamel-painted, die cast metal; matte-finished, silver colored, spherical steel mesh grille
    • Connector: Three-pin professional audio connector (male XLR type)
    • Weight: Net: 298 g
    • Dimensions: 162 mm L x 51 mm W
  • AKG DRUM SET Big II

    • AKG DRUM SET Big II

    Stock 1 set
    SERIAL #
    REMARKS AKG DRUM SET Big II
    LINK https://www.akg.com/support/DrumSetBig_.html
    More info
    Information Hide
    AKG DRUM SET Big II
    • The Drum Set Big II reference drum microphone set contains everything you need to professionally mike up or record a drum kit. The included microphones represent a “best of” selection containing legendary AKG mics for drummers and other instrument-miking
    • 1 x D112 bass drum microphone
    • 2 x C1000 S for overheads and more
    • 4 x C518 M for toms and snare
    • The D112 has earned a well-deserved reputation worldwide as the best kick-drum microphone ever made. The versatile C1000 S is ideally suited for all kinds of recording and live-sound applications. The C518 M is the ultimate miniature condenser microphone
    • This complete set comes in a protective aluminum carrying case.
    • Feature
    • Best of drum microphone kit includes one kick-drum, two overhead and four clip-on microphones
    • Roadworthy, rugged aluminum carrying case for easy transport and storage
    • Complete with all microphone clamps and stand adapters for plug and play
  • AKG C411

    • AKG C411

    Stock 2 pcs
    SERIAL #
    LINK https://www.akg.com/Microphones/Condenser%20Microphones/C411PP.html
    More info
    Information Hide
    AKG C411
    • Type: Pre-polarized condenser transducer
    • Polar: PatternFigure of eight
    • Audio frequency bandwidth: 10 - 18000 Hz
    • Sensitivity: 2 mV/Pa
    • Electrical impedance: 200 Ohms
    • Recommended load impedance: 1000 Ohms
    • Max. SPL for 1%/3% THD: 96 dB / 103 dB
    • Current consumption: approx. 2.2 mA
    • Audio Output: Type: Mini XLR
    • Gender: Female
    • Contacts: 3-pin
    • Dimensions: Length: 9.7 mm
    • Width: 14.2 mm
    • Height: 26.7 mm
    • Net Weight: 18 g (0.6 oz.)
    • Cable length: 1.5 m (5 ft.)
    • Design: Body: plastic
    • Finish: matte black
    • Powering Interface: Voltage: 9 to 52 V
    • Current: 2 mA
    • Application: Live Instrument: Yes
    • Instrument: Piano / Strings: Yes
  • SENNHEISER e914

    • SENNHEISER e914

    Stock 4 pcs
    SERIAL #
    LINK https://en-us.sennheiser.com/recording-microphone-instrument-studio-live-guitars-grand-pianos-cymbals-percussion-e-914
    More info
    Information Hide
    SENNHEISER e914
    • Dimensions Ø 24 x 157 mm
    • Attenuation 0, -10, -20 dB
    • Phantom powering 48 V/2,2 mA
    • Connector XLR-3
    • Sensitivity in free field, no load (1kHz) 7 mV/Pa
    • Equivalent noise level 19 dB(A)
    • Frequency response 20 - 20000 Hz
    • Nominal impedance 100 Ω
    • Max. Sound pressure level (active) - 137, 147 (with activated -10 db attenuation), 157 (with activated -20 db attenuation) db
    • Weight 198 g
    • Min. terminating impedance 1000 Ω
  • AKG C1000S

    • AKG C1000S

    Stock 4 pcs
    SERIAL #
    LINK https://www.akg.com/Microphones/Condenser%20Microphones/C1000_S.html
    More info
    Information Hide
    AKG C1000S
    • Cardioid/ hyper cardioid (changeable with PPC)
    • Operates with 48V phantom power or 2x 1.5 V AA battery
    • Switch with battery LED
    • Plug on HF shelf with PB-1000
    • Frequency range: 50 Hz - 20 kHz
    • Electric impedance: 200 Ohm
    • Sensitivity: 6 mV/ Pa (-44 dBV)
    • Max. SPL: 137 dB
    • Diameter: 34 mm
    • Length: 220 mm
    • Weight: 275 g
    • Colour: black
    • Incl. transport bag, wind shield and clamp
  • DPA 4011

    • DPA 4011

    Stock 2 pcs
    SERIAL #
    LINK https://www.dpamicrophones.com/pencil/4011-cardioid-microphone
    More info
    Information Hide
    DPA 4011
    • Directional patternCardioid
    • Principle of operationPressure gradient
    • Cartridge typePre-polarized condenser
    • Frequency response20 Hz - 20 kHz
    • Effective frequency range, ±2 dB, at 30 cm (11.8 in)40 Hz - 20 kHz
    • Sensitivity, nominal, ±2 dB at 1 kHz10 mV/Pa; -40 dB re. 1 V/Pa
    • Equivalent noise level, A-weightedTyp. 18 dB(A) re. 20 µPa (max. 20 dB(A))
    • Equivalent noise level, ITU-R BS.468-4Typ. 25 dB (correct with the attenuator in 0 dB or -20 dB setting)
    • Distortion, THD < 1%136 dB SPL RMS, 139 dB SPL peak
    • Dynamic rangeTyp. 121 dB
    • Max. SPL, THD 10%159 dB SPL peak
    • Switchable attenuator, filters etc.0 dB / -20 dB
    • Rated output impedance200 Ω
    • Minimum load impedance2 kΩ
    • Cable drive capability100 m (328 ft)
    • Output balance principleImpedance balancing with Active Drive
    • Common mode rejection ratio (CMRR)> 60 dB
    • Power supply (for full performance)P48 (Phantom Power)
    • Current consumption2.8 mA
    • ConnectorXLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
    • ColorMatte black
    • Weight158 g (5.6 oz)
    • Microphone diameter19 mm (0.75 in)
    • Capsule diameter19 mm (0.75 in)
    • Microphone length170 mm (6.7 in)
    • Maximum output voltage, RMS> 5 V
    • Polarity+V at pin 2 for positive sound pressure
    • Temperature range-40°C to 45°C (-40°F to 113°F)
    • Relative humidity (RH)Up to 90%
    • Matching tolerance (frequency response and sensitivity)±1 dB
    • Phase deviation for kit< 10°
  • DPA 4099

    • DPA 4099

    Stock 20 pcs
    SERIAL #
    LINK https://www.dpamicrophones.com/instrument/4099-instrument-microphone
    More info
    Information Hide
    DPA 4099 Instrument Microphone
    • Directional pattern: Cardioid
    • Principle of operation: Pressure gradient
    • Cartridge type: Pre-polarized condenser
    • Frequency response: 20 Hz - 20 kHz
    • Effective frequency range, ±2 dB, at 30 cm (11.8 in): 40 Hz - 20 kHz
    • Sensitivity, nominal, ±2 dB at 1 kHz: 10 mV/Pa; -40 dB re. 1 V/Pa
    • Equivalent noise level, A-weighted: Typ. 18 dB(A) re. 20 µPa (max. 20 dB(A))
    • Equivalent noise level, ITU-R BS.468-4: Typ. 25 dB (correct with the attenuator in 0 dB or -20 dB setting)
    • Distortion, THD < 1%: 136 dB SPL RMS, 139 dB SPL peak
    • Dynamic range: Typ. 121 dB
    • Max. SPL, THD 10%: 159 dB SPL peak
    • Switchable attenuator, filters etc.: 0 dB / -20 dB
    • Rated output impedance: 200 Ω
    • Minimum load impedance: 2 kΩ
    • Cable drive capability: 100 m (328 ft)
    • Output balance principleImpe: dance balancing with Active Drive
    • Common mode rejection ratio (CMRR): > 60 dB
    • Power supply (for full performance): P48 (Phantom Power)
    • Current consumption: 2.8 mA
    • Connector: XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
    • ColorMatte: black
    • Weight: 158 g (5.6 oz)
    • Microphone diameter: 19 mm (0.75 in)
    • Capsule diameter: 19 mm (0.75 in)
    • Microphone length: 170 mm (6.7 in)
    • Maximum output voltage, RMS: > 5 V
    • Polarity: +V at pin 2 for positive sound pressure
    • Temperature range: -40°C to 45°C (-40°F to 113°F)
    • Relative humidity (RH): Up to 90%
    • Matching tolerance (frequency response and sensitivity): ±1 dB
    • Phase deviation for kit: < 10°

WIRELESS MICROPHONE

  • SENNHEISER SK50 - A

    • SENNHEISER SK50 - A

    Stock 2pcs
    SERIAL #
    LINK https://en-de.sennheiser.com/wireless-microphone-bodypack-transmitter-musical-broadcast-sk-50-a
    More info
    Information Hide
    SENNHEISER SK50 - A
    • Dimensions B 250: 116 x 60 x 17 mm B 50: 94 x 60 x 17 mm
    • Frequency response (Microphone) 45 - 20000 Hz
    • Compander HiDyn plus
    • Audio-XLR connector 3-pin special connector
    • THD, total harmonic distortion < 1 %
    • Weight: B 50 / BA 50: 197 g B, 250 / BA 250: 230 g
    • AF sensitivity 13 mV - 1,55 V
    • RF frequency range 450 - 960 MHz
    • RF output power 50 mW
    • Transmission/receiving frequencies 16
    • Switching bandwidth 24 MHz
    • Peak deviation +/- 56 kHz
    • Nominal deviation +/- 40 kHz
    • Operating time battery: B 50 > 4,5 h ; B 250 > 8 h Accupack: BA 50 > 3 h ; BA 250 > 5 h
    • Modulation FM
    • RF output special connector koax
    • Type approval number A 103 926 C RF
  • SHURE QLX-D

    • SHURE QLX-D

    Stock 2pcs
    SERIAL #
    LINK https://www.shure.com/en-US/products/wireless-systems/qlx-d_digital_wireless
    More info
    Information Hide
    QLXD2 Wireless Handheld Transmitter
    • Mic Offset Range 0 to 21 dB (in 3 dB steps)
    • Battery Type Shure SB900A Rechargeable Li-Ion or AA batteries 1.5 V
    • Battery Runtime: @ 10 mW Shure SB900A: up to 10 hours; Alkaline: up to 9 hours; See Battery Runtime Chart
    • Dimensions: 256 mm × 51 mm (10.1 in. × 2.0 in.) L × Dia.
    • Weight: 347 g (12.2 oz.), without batteries
    • Housing: Machined aluminum
    • Audio Input:
    • +Configuration: Unbalanced
    • +Maximum Input Level (1 kHz at 1% THD): 145 dB SPL (SM58), typical Note: Dependent on microphone type
    • RF Output:
    • +Antenna Type Integrated Single Band Helica
    • +Occupied Bandwidth < 200 kHz
    • +Modulation Type Shure proprietary digital
    • +Power 1 mW or 10 mW See Frequency Range and ouput power table, varies by region
  • SHURE AXIENT

    • SHURE AXIENT

    Stock 2 pcs
    SERIAL #
    LINK https://www.shure.com/en-US/products/wireless-systems/axient_digital
    More info
    Information Hide
    SHURE AXIENT
    • Weight: 4800g
    • Transmission:Digital in UHF TV band
    • Type of Power Supply:Internal
    • Receiver Housings:Metal
    • Bias via BNC:Yes
    • Encryption:256 Bit AES
    • Frequency Diversity:True
    • High Density Mode: Yes
    • Interference Detection:Yes
    • Remote Control: Yes
    • DANTE-Enabled Products: Yes
    • Scan Features: Channel Scan, Group Scan
    • Sync Features: IR Sync
    • Detachable Antennas: Yes
    • Network ability: Dhcp, Link Local, Static
    • Software control :System On, Shure Plus™ Channels, Wireless Workbench, Shure Update Utility
    • Logic: No
    • Cascade: Yes
    • Rack Hardware: Integrated, Not Needed
    • Receiver type: Dual
    • Included antenna: External 1/2 Wave
    • Line Mic Switch: Yes
    • Phantom Power Protection: Yes
  • SHURE UR4D

    • SHURE UR4D

    Stock 24 pcs
    SERIAL #
    LINK https://www.shure.com/en-US/products/wireless-systems/uhf-r_wireless/ur4dp
    More info
    Information Hide
    SHURE UR4D
    • RF Carrier Frequency Range H4 / 518 - 578 MHz
    • Signal-to-Noise Ratio ltimate Quieting (ref. 45 kHz deviation) <100 dB, A-weighted
    • Overall Frequency 40Hz to 18kHz +/- 1dB
    • Response Of Channels 2400 Selectable Frequencies Across 60 MHz Bandwidth
    • Type of Receiver UR4D+ Dual Receiver - Diversity
    • Type of Outputs: XLR 3-pin: Mic / Line Switchable, Balanced Low-Z with Ground Lift Switch 1/4" Phone: 200 ohms USB: Computer Interface; RJ-45: Ethernet Network Interface
    • Headphone Monitoring 1/4" Phone with level control dial
    • Power Requirements 100 to 240 Vac, 50/60Hz 0.8 Amps max
    • Battery Type/Approx. Life None - AC power only
    • Display Backlit LCD: Group and Channel, Frequency, Automatic Transmitter Sync, Receiver name, Output Level, Squelch, Receiver Lock, LCD View, Contrast, ToneKey, Network Parameters
    • Mounting Options Rack Mount Hardware (Included)
    • Antenna Type Two band dependent antennas
    • Dimensions 1.72 x 19 x 14.39" (44 x 483 x 366mm) (HxWxD)
    • Weight 11 lbs. (5 kg)
  • SENNHEISER EW G3

    • SENNHEISER EW G3

    Stock 30 pcs
    SERIAL #
    LINK https://en-us.sennheiser.com/wireless-microphone-vocal-voice-music-presentations-ew-135-g3
    More info
    Information Hide
    SENNHEISER EW 135 G3
    • Dimensions Receiver: 82 x 64 x 24 mm Transmitter: Ø 50 x 265 mm
    • Frequency response (Microphone) 80 - 18000 Hz
    • Compander HDX
    • Audio-XLR connector 3,5 mm jack
    • Presets 12
    • Microphone dynamic
    • Sound pressure level (SPL) 154 dB(SPL) max.
    • THD, total harmonic distortion < 0,9 %
    • Weight: Receiver: ~ 160 g ;Transmitter: 450 g
    • AF sensitivity 2,1 mV/Pa
    • Signal-to-noise ratio > 110 dB(A)
    • RF frequency range 516...865 MHz
    • RF output power 30 mW
    • Transmission/receiving frequencies 1680
    • Switching bandwidth 42 MHz
    • Peak deviation +/- 48 kHz
    • In compliance with ETS 300422, ETS 300445, CE, FCC
    • Operating time Transmitter: > 8 h
    • Antenna connector 2 BNC, 50 Ω
    • Audio output level (balanced) XLR : +18 dBu max
    • Audio output level (unbalanced) Jack : +10 dBu max
  • SENNHEISER SK5200

    • SENNHEISER SK5200

    Stock 30 pcs
    SERIAL #
    LINK https://en-us.sennheiser.com/wireless-microphone-live-handheld-transmitter-skm-5200
    More info
    Information Hide
    SENNHEISER SKM5200
    • Color: black, nickel, steel blue
    • Frequency range: 830 - 960 MHz, 726 - 866 MHz, 638 - 762 MHz, 534 - 674 MHz, 450 - 570 MHz
    • RF frequency range: 450 - 960 MHz
    • Operating time: 8 h with B 5000-2 or BA 5000-2
    • RF output power: 50 mW (-3 dB) a 50 Ω
    • Modulation: Breitband-FM
    • Switching bandwidth: 36 MHz
    • Power supply: B 5000-2 (Primary cells, Type AA) or BA 5000-2 (Rechargeable battery pack)
    • Peak deviation: +/- 56 kHz
    • Spurious emission: < 4 nW
    • Nominal deviation: +/- 40 kHz
    • Type approval number: CE, FCC, IC
    • Signal-to-noise ratio: typ. 114 dB (A)eff

WIRELESS INEAR MONITOR

  • SHURE PSM900

    • SHURE PSM900

    Stock 2pcs
    SERIAL #
    LINK https://www.shure.com/en-US/products/in-ear-monitoring/psm900
    More info
    Information Hide
    Shure P9RA+ Wireless Bodypack Receiver For PSM 900 In-Ear Personal Monitoring System:
    • Frequency Band G6: 470 to 506 MHz
    • RF Filter Range -3 dB at 30.5 MHz from the Center Frequency of Each Band
    • RF Gain Active: 31 dB (Adjusts RF Sensitivity to Provide more RF Dynamic Range)
    • RF Sensitivity 2.2 μV (20 dB SINAD)
    • Image Rejection >90 dB
    • Adjacent Channel Rejection >70 dB
    • Squelch Threshold 22 dB SINAD (±3 dB), Default Setting
    • Intermodulation Attenuation >70 dB
    • Blocking >80 dB
    • Audio Output Power 100 mW Per Output (1 kHz at
    • 4-Band Parametric Equalizer: Low-Shelf Selectable Gain: ±2, ±4, ±6 dB at 100 Hz, Low-Mid Selectable Gain: ±2, ±4, ±6 dB at 160, 250, 400, 500, 630 Hz; Selectable Q: 0.7, 1.4, 2.9, 5.0, 11.5 ;High-Mid Selectable Gain: ±2, ±4, ±6 dB at 1, 1.6, 2.5, 4, 6.3
    • Volume Limiter Selectable: 0 to -48 dB in 3 dB Steps
    • Volume Lock: Selectable: 0 to -70 dB; Limits Volume Adjustment Knob; Selected Value Analogous to Volume Knob Increment
    • Audio Connector: 1/8" / 3.5 mm
    • Battery Life 4-6 Hours (Continuous Use) with 2 x AA Batteries
    • Dimensions (H x W x D) 3.3 x 2.6 x 0.9" / 8.3 x 6.5 x 2.2 cm
    • Weight 5.4 oz / 154 g without Batteries
    • Package Weight 0.955 lb
    • Box Dimensions (LxWxH) 11.2 x 5.25 x 3.2"
    Shure P9T Wireless Transmitter For PSM 900 In-Ear Personal Monitoring System
    • Frequency Band G6: 470 to 506 MHz
    • Output Power 10/50/100 mW, Selectable (Regionally Dependent)
    • Output Impedance 50 Ohms (RF, Typical)
    • Input Level +4 dBu and -10 dBV, Switchable
    • Connectors: 2 x XLR-TRS Combo Inputs ;2 x 1/4" Loop Outputs; 1 x DC Power Input; 1 x Antenna Connector; 1 x 3.5 mm Headphone Jack
    • Power Requirements 415 mA, Typical (RF On, 100 mW Power Mode, No Audio)
    • Dimensions (W x D x H) 7.75 x 6.5 x 1.6" / 19.7 x 16.6 x 4.2 cm
    • Weight 1.9 lb / 850 g
    • Package Weight 6 lb
    • Box Dimensions (LxWxH) 18.3 x 14.8 x 3.7"
  • SHURE PSM1000

    • SHURE PSM1000

    Stock 2pcs
    SERIAL #
    LINK https://www.shure.com/en-US/products/in-ear-monitoring/psm1000
    More info
    Information Hide
    SHURE PSM1000
    • * Wireless Bodypack Receiver: Tri-band RF Filtering: –3 dB at 30.5 MHz from the center frequency of each band
    • Active RF Gain Control: 31 dB (adjusts RF sensitivity to provide more RF dynamic range)
    • RF Sensitivity (20 dB SINAD): 2.2 μV
    • Squelch Threshold: 22 dB SINAD (±3 dB), default setting
    • Adjacent Channel Rejection: >70 dB
    • Intermodulation Attenuation: >70 dB
    • Blocking: >80 dB
    • Image Rejection: >90 dB
    • Audio Output Power (1kHz @ <1% distortion, peak power, @16Ω): 100 mW per output
    • Minimum Load Impedance: 4 Ω
    • Output Impedance: <1 Ω
    • 4-Band Parametric EQ: + Low Shelf Selectable Gain: ±2 dB, ±4 dB, ±6 dB @100 Hz + Low Mid Selectable Gain: ±2 dB, ±4 dB, ±6 dB @160 +Hz, 250 Hz, 400 Hz, 500 Hz, 630 Hz ; Selectable Q: 0.7, 1.4, 2.9, 5.0, 11.5 + High Mid Selectable Gain: ±2 dB, ±4 dB, ±6
    • Volume Limiter Selectable: 0 dB to -48 dB in 3 dB steps
    • Volume Lock Limits volume adjustment knob. Selected value analogous to volume knob increment. Selectable: 0 dB to -70 dB
    • Battery Life: 4–6 hours (continuous use) with AA batteries
    • Net Weight: 158 g, without batteries
    • Dimensions: 99 mm x 66 mm x 23 mm (3.9 in. x 2.6 in. x 0.9 in.) H x W x D
    • * Dual Wireless Transmitter: RF Output Power Selectable: 10, 50, 100 mW (regionally dependent)
    • RF Output Impedance: 50 Ω (typical)
    • Net Weight: 4.7 Kg (10.4 lb)
    • Dimensions: 44 X 483 X 343 mm
    • Power Requirement (RF on, 100 mW power mode, no audio): Input: 100-240V AC, 50/60 Hz, 0.5A max (5.5 max outlet loaded) ; Output: 100-240V AC, 5A max, unswitched
    • Audio Input
    • Connector Type : Combination XLR and 6.35 mm (1/4”) TRS
    • Polarity XLR: Non-inverting (pin 2 positive with respect to pin 3) 6.35 mm (1/4”) ; TRS: Tip positive with respect to ring
    • Configuration: Electronically balanced
    • Impedance: 70.2 kΩ (actual)
    • Nominal Input Level: Switchable: +4 dBu, –10 dBV
    • Maximum Input Level: +4 dBu: +29.2 dBu ; –10 dBV: +12.2 dBu
    • Pin Assignments: XLR: 1=ground, 2=hot, 3=cold 6.35 mm (1/4”) TRS: Tip=hot, Ring=cold, Sleeve=ground
    • Phantom Power Protection: Up to 60 V DC
    • Audio Output
    • Connector Type: 6.35 mm (1/4”) TRS
    • Configuration: Electronically balanced
    • Impedance: Connected directly to inputs
  • SENNHEISER ew 300-IEM G3

    • SENNHEISER ew 300-IEM G3

    Stock 8 pcs
    SERIAL #
    REMARKS SENNHEISER ew 300-IEM G3
    LINK https://en-us.sennheiser.com/wireless-microphone-live-monitoring-system-ew-300-iem-g3
    More info
    Information Hide
    SENNHEISER IEM G3
    • Sturdy metal housing
    • 42 MHz bandwidth: 1680 tunable UHF frequencies for interference-free reception
    • Enhanced frequency bank system with up to 16 compatible frequencies
    • Adaptive diversity for high reception quality
    • Pilot tone squelch for eliminating RF interference when transmitter is turned off
    • Automatic frequency scan feature searches for available frequencies
    • Enhanced AF frequency range
    • Wireless synchronization of receiver parameter from transmitter
    • User-friendly menu operation with more control options
    • Illuminated graphic display
    • Auto-Lock function avoids accidental changing of settings
    • HDX compander for crystal-clear sound
    • Receiver features battery indicatation in 4 steps
    • HiBoost, adjustable limiter, stereo/focus mode, balance
    • Contacts for recharging BA 2015 accupack directly in the receiver
    • Wide range of accessories adapts the system to any requirement
    • Dimensions: 82 x 64 x 24 mm
    • Connector: 2 x XLR-3 jack. / 3,5mm jack
    • Weight: ~ 160 g
    • Operating time: 4-6 h
    • Power supply: 2 AA batteries, 1.5 V
    • Output voltage: 2 x 100 mW at 32 Ω
    • Adjacent channel rejection: ≥ 65 dB
    • Intermodulation attenuation: ≥ 70 dB
    • Sensitivity: 2.5 μV at 52 dBAeff S/N
    • Frequency range: 606...648 MHz, 823...865 MHz / Germany, 823...865 MHz, 780...822 MHz / Germany, 780...822 MHz, 734...776 MHz, 626...668 MHz, 566...608 MHz, 516...558 MHz.

ACCESSORIES

  • GRAVITY KSX 2

    • GRAVITY KSX 2

    Stock 4 pcs
    SERIAL #
    LINK https://www.gravitystands.com/en/products/keyboard-stands/2859/ksx-2?c=629
    More info
    Information Hide
    Specifications GRAVITY KSX 2 Keyboard Stand
    • Product type: Stands and Tripods
    • Type: Keyboard stands
    • Material: Steel
    • Surface: Powder coated
    • Color: Black
    • Decks: 1
    • Max. support depth: 400 mm
    • Min height: 100 mm
    • Max height: 900 mm
    • Max load (support): 65 kg
    • Interchangeable rings: 1 x 15 mm , 4 x 20 mm , 4 x 30 mm
    • Black ring pack included: Yes
    • Weight: 4,45 kg
  • GRAVITY MS4222B

    • GRAVITY MS4222B

    Stock 10 pcs
    SERIAL #
    LINK https://www.gravitystands.com/en/products/microphone-stands/2899/ms-4222-b?c=611
    More info
    Information Hide
    Specifications GRAVITY MS4222B
    • Product type: Stands and Tripods
    • Type: Microphone Stands
    • Tubing material: Steel
    • Tubing colour: Black
    • Tubing surface: Powder coated
    • Min. height: 510 mm
    • Max. height: 740 mm
    • Transport length: 650 mm
    • Height adjustment: Yes
    • Base type: Tripod
    • Base material: Zinc die-cast
    • Boom model: 2-point adjustment
    • Boom length: 880 mm
    • Interchangeable rings: 1 x 25 mm , 2 x 15 mm , 4 x 20 mm
    • Black ring pack included: Yes
    • Weight: 2,2 kg
  • GRAVITY MS4322B

    • GRAVITY MS4322B

    Stock 20 pcs
    SERIAL #
    LINK https://www.gravitystands.com/en/products/microphone-stands/2909/ms-4322-b?c=611
    More info
    Information Hide
    Specifications GRAVITY MS4322B
    • Product type: Stands and Tripods
    • Type: Microphone Stands
    • Tubing material: Steel
    • Tubing colour: Black
    • Tubing surface: Powder coated
    • Min. height: 1030 mm
    • Max. height: 1690 mm
    • Transport length: 1050 mm
    • Height adjustment: Yes
    • Base type: Tripod
    • Base material : Zinc die-cast
    • Boom model: 2-point adjustment
    • Boom length: 880 mm
    • Interchangeable rings: 1 x 25 mm , 2 x 15 mm , 4 x 20 mm
    • Black ring pack included: Yes
    • Weight: 2,7 kg
  • GRAVITY MS4321B

    • GRAVITY MS4321B

    Stock 20 pcs
    SERIAL #
    LINK https://www.gravitystands.com/en/products/microphone-stands/2907/ms-4321-b?c=611
    More info
    Information Hide
    Specifications GRAVITY MS4321B
    • Product type: Stands and Tripods
    • Type: Microphone Stands
    • Tubing material: Steel
    • Tubing colour: Black
    • Tubing surface: Powder coated
    • Min. height: 1030 mm
    • Max. height: 1690 mm
    • Transport length: 1050 mm
    • Height adjustment: Yes
    • Base type: Tripod
    • Base material Zinc die-cast
    • Boom model: 2-point adjustment
    • Boom length: 790 mm
    • Interchangeable rings: 1 x 25 mm , 2 x 15 mm , 4 x 20 mm
    • Black ring pack included: Yes
    • Weight: 2,7 kg
  • TELEGARTNER OPTICAL 200M

    • TELEGARTNER OPTICAL 200M

    Stock 2 pcs
    SERIAL #
    LINK https://www.telegaertner.com/en/info/highlights/fo-cables-drum/fo-outdoor-cables/
    More info
    Information Hide
    TELEGARTNER OPTICAL 200M
    • Cable construction: FO universal cable A/I-DQ(ZN)BH
    • Cable jacket: LSZH, jacket colour yellow (Singlemode) or orange (Multimode), UV resistent
    • Fiber type: Singlemode OS2, Multimode OM1, OM2, OM3, OM4
    • Fiber count: 4, 6, 8, 12, 24, 48 fibers
    • Put-up: 2,000 m on single-use plywood reel
    • Outdoor cable A-DQ(ZN)B2Y
    • Cable construction: FO outdoor cable, A-DQ(ZN)B2Y
    • Cable jacket: PE, jacket colour black, UV resistent
    • Fiber type: Singlemode OS2, Multimode OM2, OM3, OM4
    • Fiber count: 4, 6, 8, 12, 24, 48 fibers
    • Put-up: 2,000 m on single-use plywood reel
  • KLARK TECHNIK DN200

    • KLARK TECHNIK DN200

    Stock 2 pcs
    SERIAL #
    LINK https://www.klarkteknik.com/product.html?modelCode=P0E3G
    More info
    Information Hide
    KLARK TECHNIK DN200
    • Inputs: Type: Active electronic, balanced or unbalanced
    • Impedance: 1 MΩ nominal, balanced or unbalanced (¼ " TRS connectors), 20 kΩ (XLR input, RCA Phono input)
    • Connectors: 2 Neutrik Combo XLR/¼ " TRS input connectors with parallel linked RCA Phono input connectors and ¼ " TRS linked outputs connectors
    • Maxmum: level +30 dBu (with pad enabled)
    • Attenuator 20 dB pad
    • Outputs: Type: Transformer balanced
    • Impedance: 75 Ω
    • Connector: 3 pin XLR
    • Max. Level: +10 dBu with load >2 kΩ
    • Min. load: 600 Ω
    • Performance: Noise: -100 dBu, 20 Hz to 20 kHz unweighted, with input terminated by 10 kΩ resistor
    • Frequency response: +0.5/-1 dB 20 Hz to 20 kHz
    • Distortion (THD+N): <0.01% @ 1 kHz, +4 dBu
    • Power Requirement: Voltage: +48 V Phantom*
    • Current consumption: <20 mA (Both channels)
    • Weight: Net: 0.95 kg
    • Dimensions: Length: 143 mm (5.6 inch)
    • Width: 106 mm (4.2 inch)
    • Height: 59.2 mm (2.3 inch)
  • RADIAL PRO D2

    • RADIAL PRO D2

    Stock 4 pcs
    SERIAL #
    LINK https://www.radialeng.com/product/prod2
    More info
    Information Hide
    RADIAL PRO D2
    • Audio circuit type: Passive, transformer based
    • Transformer: Eclipse ET-DB2, 12:1 ratio
    • Number of channels: 2
    • Frequency response: 20Hz ~ 18.5KHz (± 0.2dB)
    • Dynamic range: 128dB
    • Total harmonic distortion: 0.01% from 20Hz~20kHz @-10dB
    • Phase Deviation: 1° @ 100Hz; 8° @ 20Hz
    • Input Impedance: 140k Ohms, unbalanced
    • Output Impedance: 150 Ohms, balanced
    • Maximum Input: +18dB @ 20Hz
    • Features
    • Input pad, 180° polarity reverse, Ground lift
    • Input Connectors: 1/4"
    • Output Connectors: XLR, 1/4" thru
    • General
    • Construction: 14 gauge steel chassis & outer shell
    • Size (L x W x D): 5" x 3.3" x 1.8" (127mm x 84.1mm x 45.5mm)
    • Weight: .54kg (1.2lbs)
    • Shipping size (L x W x D): 6.5" x 4" x 3" (165mm x 102mm x 76mm)
    • Shipping weight: 0.61 kg (1.35 lbs)
    • Power: Passive, no power required
    • Conditions: For use in dry locations only between 5°C and 40°C
    • Warranty: Radial 3-year, transferable
  • RADIAL PRO DI

    • RADIAL PRO DI

    Stock 6 pcs
    SERIAL #
    LINK https://www.radialeng.com/product/prodi
    More info
    Information Hide
    RADIAL PRO DI
    • Audio circuit type: Passive, transformer based
    • Transformer: Eclipse ET-DB2, 12:1 ratio
    • Number of channels: Single channel (mono)
    • Frequency response: 20Hz ~ 18.5KHz (± 0.2dB)
    • Dynamic range: 128dB
    • Total harmonic distortion: 0.01% from 20Hz~20kHz @-10dB
    • Phase Deviation: 1° @ 100Hz; 8° @ 20Hz
    • Input Impedance: 140k Ohms, unbalanced
    • Output Impedance: 150 Ohms, balanced
    • Maximum Input: +18dB @ 20Hz
    • Input pad, Ground lift
    • Input Connectors: 1/4" in & thru
    • Output Connectors: XLR-M out
    • Construction: 14 gauge steel chassis & outer shell
    • Size (L x W x D): 4.25” x 2.75” x 1.75" (108 x 70 x 44mm)
    • Weight: 1.2lb (0.54kg)
    • Shipping size (L x W x D): 6.5" x 4" x 3" (165 x 76 x 102mm)
    • Shipping weight: 1.35lb (0.61kg)
    • Power: Passive, no power required
    • Conditions: For use in dry locations only between 5°C and 40°C
    • Warranty: Radial 3-year, transferable
  • ARX MSX48

    • ARX MSX48

    Stock 6 pcs
    SERIAL #
    LINK http://www.arx.com.au/worldwide/msx48.htm
    More info
    Information Hide
    ARX MSX48
    • Input Impedance 300 Ohms
    • Output Impedance 2 secondaries @ 600 Ohms each
    • Frequency Response 30Hz - 20 KHz ± 1dB
    • Maximum Output Level + 20dBm
    • THD at Max Output 0.2% 30 Hz - 20KHz @ 20dBm
    • Insertion Loss 0.5dB @ 1 KHz (600 Ohm source & load)
    • Input Connectors 3 pin female XLR wired Pin 2 + Hot, Pin 3 – Cold
    • Main Output 3 Pin male XLR wired Pin 2 + Hot, Pin 3 – Cold
    • Monitor & Aux Output 3 pin male XLR wired Pin 2 + Hot, Pin 3 – Cold. Audio grounds not connected; Pin 1 is floating.
    • Weight 13.5 lbs (6 Kg)
  • RADIAL ENGINEERING SW8

    • RADIAL ENGINEERING SW8

    Stock 1 pcs
    SERIAL #
    LINK https://www.radialeng.com/product/sw8
    More info
    Information Hide
    RADIAL SW8
    • Specifications
    • Audio circuit type: Passive signal path with active relay switching
    • Transformer: Eclipse ET-DB2
    • Number of channels:8
    • Frequency response: 20Hz ~ 20KHz
    • Dynamic range: >120dB
    • Gain: -20dB
    • Total harmonic distortion: 0.002%
    • Intermodulation Distortion: >0.002%
    • Phase Deviation: -2° @ 20Hz
    • Input Impedance: 140k Ohms, balanced
    • Output Impedance: 150 Ohms, balanced
    • Common Mode Rejection Ratio: -112dB at 50/60Hz
    • Equivalent Input Noise: -95dBu
    • Noise: -115dBu
    • Maximum Input: 26dBu
    • Features
    • Input pad, Ground lift, Remote Footswitch
    • Input Connectors: 1/4" TRS, D-sub
    • Output Connectors: XLR, D-sub
    • Extras: Contact Alarm Input, JR-2 XLR
    • General
    • Construction: 14 gauge steel chassis & outer shell
    • Size (L x W x D): 17.5" x 6" x 1.75" (44.5cm x 15.25cm x 4.5cm)
    • Weight: 9.2 lb (4.2kg)
    • Shipping size (L x W x D): 22" x 10.375" x 4.5" (55.9cm x 26.4cm x 11.4cm)
    • Shipping weight: 9.7 lb (4.4 kg)
    • Power: Two +15VDC/400mA power supplies included
    • Conditions: For use in dry locations only between 5°C and 40°C
    • Warranty: Radial 3-year, transferable
  • YAMAHA SWP1-8MMF

    • YAMAHA SWP1-8MMF

    Stock 1pcs
    SERIAL #
    LINK https://usa.yamaha.com/products/proaudio/network_switches/swp1/index.html
    More info
    Information Hide
    YAMAHA SWP1-8MMF
    • Number of LAN ports (1000BASE-T/100BASE-TX/10BASE-T, etherCON connector): 8
    • Number of SFP ports (1000BASE-SX, opticalCON connector): 2 (1 optical module is installed as standard)
    • Console port: 1 (RJ-45)
    • Automatic negotiation: Available
    • Auto MDI/MDI-X: Available
    • Switching capacity: 20 Gbit/s
    • Throughput: 15Mpps
    • Maximum number of MAC addresses: 16,384
    • Frame buffer : 1024 kB
    • VLAN: Port VLAN, Tag VLAN (IEEE802.1Q), Private VLAN
    • Maximum number of VLANs: 256 (VLAN ID 1-4,094) *VLAN ID 1 is the default VLAN ID.
    • IP multicast: IGMP Snooping (v1/v2/v3)
    • QoS: 8 egress queues, Policy-based QoS, Remarking (CoS, ToS, DSCP), Scheduling (SP, WRR)
    • Flow control: IEEE802.3x (Full-duplex), back pressure (Half-duplex)
    • Support functions: Storm control, HOL blocking prevention, Loop detection, ACL, SNMP agents, Link aggregation (IEEE 802.3ad LACP, Static), Spanning tree (STP*, RSTP*, MSTP), Port mirroring, Port shutdown, Link speed down shift, Packet counter, Power savin
    • DIP switches: CONFIG, VLAN PRESET
    • Indicators: Front: POWER, LED MODE×4, PORT×8×2*, SFP×2 *The LED MODE button allows the PORT lamps to be switched between indicating LINK/ACT-SPEED, STATUS, or VLAN.
    • Operating temperature range: 0° to 40°
    • Storage temperature: -20 to 60°C
    • Power supply (AC IN inlet): AC100V-240V, 50/60Hz, Internal power supply (no power switch), Power supply inlet: locking type
    • Power supply (EXT DC INPUT inlet):External power supply requirements: 24VDC±2V, 1A, XLR-4-32 type Connector
    • Maximum power consumption: 11 W, 0.21 A
    • Heat dissipation: 9.5 kcal/h
    • Chassis: Metal case, no fan
    • Hazardous substances management: RoHS compliant
    • Dimensions:
    • + W: 480mm
    • + H: 44mm
    • + D: 362 mm
    • Weight: 4,2 kg
    • Accessories: Power code, Owner's manual
    • Options: MMF-SWP1 (Optical expansion unit)

MUSICAL INSTRUMENT

  • MARSHALL 1960A

    • MARSHALL 1960A

    Stock 2pcs
    SERIAL #
    LINK https://marshall.com/marshall-amps/products/cabinets/1960a-and-1960b
    More info
    Information Hide
    Marshall 1960A 300-watt 4x12
    • GENERAL: Model: 1960A
    • ELECTRONICS: Inputs: 2
    • Speaker configuration: 4x12"
    • Speaker model: Celestion G12T-75 (16Ω, 75W)
    • Power handling: 2 x 150W (stereo mode) 1 x 300w (mono mode)
    • Unit impedance: 8Ω (stereo mode), 16/4Ω (mono mode)
    • Dust cover: M-COVR-00050 1960A as shown above (castors and cover sold separately) or M-COVR-00022 1960A (sold separately)
    • Weight: 36.5 kg / 80.5 Ibs
    • Width: 770 mm / 30.3"
    • Depth: 365 mm / 14.4"
    • Height: 755 mm / 29.7"
  • MARSHALL JVM410H

    • MARSHALL JVM410H

    Stock 2pcs
    SERIAL #
    LINK https://marshall.com/marshall-amps/products/amps/jvm/jvm410h
    More info
    Information Hide
    MARSHALL JVM410H
    • Model JVM410H
    • Range: JVM
    • Technology: Valve
    • Channels: 4 (Multi)
    • Output wattage: 100W
    • Outputs: Speaker outputs: 5 x 1/4" jack sockets (16Ω load / 8Ω load / 4Ω load), Emulated Line Out (XLR), MIDI Thru
    • Inputs: 1 x 1/4" jack instrument input, MIDI In, Footswitch
    • Controls: Channel and mode select (button), gain (per channel), treble (per channel), middle (per channel), bass (per channel), volume (per channel), reverb (per channel), presence, resonance, master volume select, master volume (switchable for each chann
    • Effects: Digital reverb
    • Effects loop: 2, 1 x series parallel, 1 x series
    • Preamp valves: 4 x ECC83, 1 x ECC83 (phase splitter)
    • Power amp valves: 4 x EL34
    • Footswitch: PEDL-91016 included
    • Cable: Detachable power cable included, speaker cable included
    • Weight: 22 kg / 49 lbs
    • Width: 740 mm / 29.1"
    • Height: 310 mm / 12.2"
    • Depth: 215 mm / 8.5"
  • AMPEG SVT-810E

    • AMPEG SVT-810E

    Stock 2pcs
    SERIAL #
    LINK https://ampeg.com/products/classic/svt810e/
    More info
    Information Hide
    AMPEG SVT-810E
    • LF Drivers: 8 x 10”
    • Voice Coil: 2”
    • Magnet Weight (each): 30 oz
    • RMS Power Handling: 2 x 400-Watts (Stereo)
    • RMS Power Handling: 800-Watts (Mono)
    • Frequency Response (-3dB): 58Hz-5kHz
    • Usable Low Frequency (-10dB): 40Hz
    • Nominal Impedance: 2 x 8-Ohms (Stereo)
    • Nominal Impedance: 4-Ohms (Mono)
    • Sensitivity: 100dB
    • Maximum SPL: 130dB
    • Dimensions (W x H x D inches): 26 x 48 x 16
    • Shipping Weight: 165 Pounds
    • Handling Weight: 140 Pounds
  • AMPEG SVT-3PRO

    • AMPEG SVT-3PRO

    Stock 2pcs
    SERIAL #
    LINK https://ampeg.com/products/pro/svt3pro/
    More info
    Information Hide
    AMPEG SVT-3PRO
    • RMS Power Output (8 Ohms): 275-Watts
    • RMS Power Output (4 Ohms): 450-Watts
    • Preamp: Tubes (3 x 12AX7)
    • Driver Tubes: 1 x 12AX7, 1 x 12AU7
    • Power Amp: Solid-State
    • Tone Controls: 3-Band
    • Mid Tone Control: 5-Position
    • Graphic EQ: Yes, 9-Band
    • Ultra Low/High Boosts: Yes
    • Balanced Line Out: Yes, Pre/Post with Ground Lift and Level
    • Effects Loop: Yes
    • Preamp Out/Power Amp In: Yes
    • Dimensions (W x H x D inches): 19 x 3.5 x 15.5
    • Weight: 26 Pounds
  • YAMAHA TOUR CUSTOM

    • YAMAHA TOUR CUSTOM

    Stock 1 bộ
    SERIAL #
    LINK https://europe.yamaha.com/en/products/musical_instruments/drums/ac_drums/drum_sets/tour_custom2/index.html
    More info
    Information Hide
    YAMAHA TOUR CUSTOM
    • Hoop:
    • + Material: TT / FT : Inverse Dyna Hoop , BD : Maple
    • + Thickness: TT / FT : 2.3mm, BD : 8.0mm
    • Lugs:
    • + Type: Absolute Lug (Chrome finish)
    • Shells:
    • + Thickness: 5.6mm
    • + Material: Maple (6ply)
    • Head:
    • + Top: REMO Clear Ambassador
    • + Bottom: REMO Clear Ambassador
    • + Front: BD : REMO Smooth White Powerstroke3 with Yamaha Logo
    • + Batter: BD : REMO Powerstroke3 Clear
    • Bearing Edge: TT / FT / BD: 45 degrees
    • Tom Mount: YESS